Bondo® Brand Products

From sanding to paint protection and everything in between, there are Bondo® brand products for your frame, body and fibreglass repair needs.

View Products

Tips for using Bondo® Body Fillers

  • Mixing Body Filler

    With decades of experience in auto body repair, 3M experts share one of the most important steps for a successful project – how to mix Bondo® Body Filler and hardener. Well-mixed Bondo® Body Filler ensures a great finish on your project. In the video below, we share our best tips, like using a clean surface, mixing in small batches and folding the filler versus stirring.

  • Applying and Sanding Filler

    The key to a great finish on your auto body repair project is applying and sanding filler. With 3M sandpaper and Bondo® Body Fillers, you can be sure you’re project will turn out great the first time. Using body filler doesn’t have to be intimidating. This video below offers a few techniques for a great finish, like making sure the surface is ready for filler and sanding the surface smooth.

  • Common Mistakes in Body Repair

    Bondo® Body Fillers have been around for over 50 years, and we’ve learned a thing or two about body repair. Whether you’re a beginner or an old hand, here are a few tips to make your project easier. With help from 3M body repair experts, your repair will turn out beautiful. We’ve compiled a few common questions in this video.

Bondo Products

View All
  • Body Fillers

    Bondo® Body Fillers are excellent for auto repairs because they chemically cross-link to cure. They are cured and sandable within in only 20 minutes, and paintable in 45-60 minutes.

  • Fibreglass Resins

    Bondo® Fibreglass Resin is sandable in less than 2 hours, compatible with all paints, and creates a strong and long lasting bond.

  • Kits

    Bondo® Fibreglass Resins & Repair Kits are 100% waterproof, they do not shrink, and make excellent sealers.

  • Reinforced Body Filler

    Bondo® Reinforced Filler products offer different repair solutions to help meet your project needs. Each product is reinforced with short fibreglass strands or long fibreglass strands. These reinforced fillers are significantly stronger than regular fillers and are waterproof. Great for repairing fibreglass and rust holes in metal.

  • Glazes and Hardeners

    Bondo® Glazes are used when contouring and finishing surfaces or repairing minor surface imperfections prior to painting. Each product is self-leveling and easy to apply and sand. Bondo® Hardeners are designed to work with the Bondo® Fillers during the mixing process.

  • Adhesives and Sealants

    Bondo® Plastic Metal seals and fills almost any metal surface. File, sand, drill and paint repaired surface when dry. Great for seams and minor holes.

  • Tools and Accessories

    Bondo® brand tools can help you get your job done, at every step of the process. They can help you prepare a surface, mix and spread body filler, as well as get a great finish to your project.

Other 3M Sites:
Partner Portal
Follow Us