1. All 3M Products

3M™ Adhesive Transfer Tape, 465, clear, 2 mil, 1/4 in x 60 yd (0.64 cm x 55 m)

3M ID 7000047501
  • Easy liner release for manual or hand applications
  • High-tack, excellent adhesion to most paper stocks
  • Good low temperature performance and peel strength on a variety of surfaces
  • Bond strength is dependent upon the amount of adhesive-to-surface contact developed
 More...
Specifications
Adhesive Type
Acrylic
Applications
Gasket Assembly, Mounting and Trim Attachment, Zero-Speed and General Splicing
Brand
3M™
Face Side Adhesive Type
400 High Tack Acrylic
Indoor/Outdoor
Both
Industries
General Industrial, MRO, Paper, Print
Master Size Length
180 Linear Yard
Master Size Width
48 Inch
Maximum Operating Temperature (Celsius)
121 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
250 Degree Fahrenheit
Minimum Operating Temperature (Fahrenheit)
-60 Degree Fahrenheit
Position
Best
Primary Liner
60# Densified Kraft Paper (DK)
Primary Liner Colour
Tan
Product Form
Roll
Set Time
<10 Second
Substrate 1
Paper & Cardboard
Substrate 2
Metal, Paper & Cardboard, Smooth
Total Tape Thickness without Liner (Imperial)
2 Milli-inch (mil)
Total Tape Thickness without Liner (metric)
0.05 mm
Units per Case
144 Roll
Details
  • Easy liner release for manual or hand applications
  • High-tack, excellent adhesion to most paper stocks
  • Good low temperature performance and peel strength on a variety of surfaces
  • Bond strength is dependent upon the amount of adhesive-to-surface contact developed
  • Firm application pressure helps develop better adhesive contact and improve bond strength
  • To obtain optimum adhesion, the bonding surfaces must be clean, dry, and well unified
  • Temperature holding is generally satisfactory
  • Some typical surface cleaning solvents are isopropyl alcohol or heptane*
  • Ideal tape application temperature range is 70°F to 100°F (21°C to 38°C)
  • Application to surfaces at temperatures below 50°F (10°C) is not recommended

3M™ Adhesive Transfer Tape 465 is a 2.0 mil 3M™ High Tack Acrylic Adhesive 400 with a 3.5 mil, 60 pound densified kraft paper liner. It offers high speed flying splices on most paper grades, as well as a high-tack and good low temperature performance and peel strength on a variety of surfaces. 3M™ Adhesive Transfer Tape 465 is a general purpose tape intended for use in printing applications such as splicing, core starting, flexography or laminating.

3M™ Adhesive Transfer Tape 465 features an easy liner release for manual or hand applications. It has a fibred adhesive and provides high-tack with excellent adhesion to most paper stocks. 3M™ Adhesive Transfer Tape 465 has high speed flying splices and zero speed splices on most grades of paper. It is an excellent choice for a variety of printing applications, including splicing, core starting, flexo or laminating.

Suggested Applications

  • Used for core starting, splicing, bonding, mounting, attaching, holding, affixing, joining and laminating
  • Used for paper to paper applications, splicing of foils, films and fabrics, as well as attaching metal or plastic nameplates
  • Ideal for promotional items such as posters
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français