1. All 3M Products
  • 3M™ All Weather Flashing Tape, 8067, tan, 6 in x 75 ft, slit liner
  • 3M™ All Weather Flashing Tape, 8067, tan, 6 in x 75 ft, slit liner

    3M ID 7000049772
    • Offers 0°F (-17.8°C) to 120°F (65.6°C) application temperature range
    • High tack adhesive sticks and stays stuck to most common building materials
    • Resists UV exposure for up to six months
    • No adhesive melting or staining in summer heat
     More...
    Specifications
    Adhesion Strength
    60 oz/in
    Adhesion Strength (metric)
    66 N/100mm
    Adhesive Type
    Acrylic
    Applications
    Flashing Windows & Doors
    Backing Material
    Proprietary film
    Backing Thickness (Imperial)
    5 Milli-inch (mil)
    Backing Thickness (metric)
    0.13 mm
    Brand
    3M™
    Industries
    Construction
    Length
    75 ft
    Length (Metric)
    22.86 m
    Maximum Operating Temperature (Celsius)
    80 Degree Celsius
    Maximum Operating Temperature (Fahrenheit)
    176 Degree Fahrenheit
    Minimum Operating Temperature (Fahrenheit)
    -40 Degree Fahrenheit
    Primary Liner
    Heavy Paper Split
    Product Form
    Roll
    Shelf Life in Months (from date of manufacture)
    24
    Thickness
    9.9 Milli-inch (mil)
    Thickness (Metric)
    0.25 mm
    Units per Case
    8
    Width
    6 in
    Width (Metric)
    152.4 mm
    Details
    • Offers 0°F (-17.8°C) to 120°F (65.6°C) application temperature range
    • High tack adhesive sticks and stays stuck to most common building materials
    • Resists UV exposure for up to six months
    • No adhesive melting or staining in summer heat
    • Very low vapour transmission rate

    3M™ All Weather Flashing Tape 8067 is a self-adhesive barrier for use in the construction industry to seal window and door openings against moisture intrusion.

    3M™ All Weather Flashing Tape 8067 is a self-adhered, waterproof flashing membrane designed for sealing around openings and penetrations in exterior walls. This product has an acrylic pressure sensitive adhesive that aggressively sticks and stays stuck both at lower and higher application temperatures than traditional flashing tapes. It adheres to damp surfaces and the proprietary backing seals around hand driven nails and staples to prevent moisture intrusion. This backing is also tough, resists punctures and tears, yet it is thin to fit conveniently into corners and under siding. The split paper release liner provides fast application with easy and accurate positioning of the tape.

    Suggested Applications

    • Adhesive provides an unusual combination of both cold temperature and hot temperature adhesion to most substrates, which can extend the construction season in many climates
    • Tough backing resists punctures and tears during application and is uniquely designed with a thin backing to conveniently fit into corners and under siding
    • When installed properly as a concealed flashing in vertical walls in frame construction, it prevents moisture intrusion and avoids the problems caused by water infiltration
    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français