1. 3M Canada
  • 3M™ Cold Shrink QT-III Termination Kit 7673-S-8, 69/72.5kV
  • 3M™ Cold Shrink QT-III Termination Kit 7673-S-8, 69/72.5kV

    3M ID 7000133486
    • Compact design makes installations easier in restricted spaces
    • No special tools or torch required
    • Accommodates a wide range of cables in a wide range of applications
    • Hi-K stress control and high dielectric constant material minimize stress
     More...
    Specifications
    Brand
    3M™
    Cable Shielding
    Jacketed Concentric Neutral (JCN), Longitudinally Corrugated (LC), Tape Over Wire, Wire-Over-Tape Shield
    Cable Size Range
    1500-3000 kcmil
    Colour Family
    Black
    Conductor Sizes
    1500 kcmil, 2000 kcmil, 2500 kcmil, 3000 kcmil
    Insulation Outside Diameter Range
    2.79-3.45 in
    Insulation Outside Diameter Range (metric)
    70.9 - 87.6 mm
    Manufacturing Origin
    USA
    Material
    Silicone Rubber
    Number of Conductors
    1
    Product Colour
    Black
    Product Type
    Termination Kit
    Units per Case
    1
    Voltage
    325 kV, 350 kV, 69 kV, 69-72.5 kV, 72.5 kV
    Details
    • Compact design makes installations easier in restricted spaces
    • No special tools or torch required
    • Accommodates a wide range of cables in a wide range of applications
    • Hi-K stress control and high dielectric constant material minimize stress

    3M™ Cold Shrink QT-III Termination Kit 7673-S Series Kits let you make safe, single-phase terminations, suitable for indoor or outdoor installation on a variety of power cables. Unlike traditional kits, 3M Cold Shrink Technology allows the installer to use same installation techniques as used for 3M's medium-voltage cold shrink accessories.

    Each 3M™ Cold Shrink QT-III Termination contains sufficient quantities of the following materials as appropriate to make one single-phase termination (lug not included unless requested in advance): Silicone Rubber Skirted Stress Control Assembly, Hi-K Stress Control Adapter Assembly, Lug Seal Tube, Ground Seal Tube, Ground Strap Assembly, Constant Force Springs, Tubes 3M™ Red Compound P55/R (Non-Silicone Grease), Scotch® Electrical Shielding Tape 24, 3M™ Scotch-Seal™ Mastic Sealing Tape 2229, 3M™ Copper Foil Shielding Tape 1181, Scotch® Vinyl Electrical Tape Super 88, 3M™ Cable Cleaning Pads CC-3, Scotch® Self-fusing Silicone Rubber Tape 70 and an instruction sheet.

    Suggested Applications

    • Terminate solid dielectric tape, longitudinally corrugated (LC), jacketed concentric neutral (JCN), tape-over-wire (TOW), or wire-over-tape (WOT) shielded power cables
    • Outdoor or indoor installations
    Contact a Representative

    We’re here to help.

    All fields are required.

    • Enter your 10-digit phone number. Numbers only (5555555555).

    3M will use the information to respond to your request and in accordance with our Privacy Policy.

    3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications, which may include promotions, product information and service offers.

    Loading wheel
    A green circle with a checkmark inside.
    Thank you for contacting us.

    Our goal is to respond to your request within 1-2 business days. Some questions, however, may need further investigation so that we can provide you with an appropriate response.

    A red circle with an x inside.
    Sorry!

    We can’t seem to complete your request. Please try again.

    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français