1. 3M Canada
  • 3M™ Cold Shrink Quick Splice Low Voltage, QSLV-M-8-2/0, non-shielded, 1 kV, cable O.D. 0.20-0.75 in
  • 3M™ Cold Shrink Quick Splice Low Voltage, QSLV-M-8-2/0, non-shielded, 1 kV, cable O.D. 0.20-0.75 in

    3M ID 7000058804
    • Quick and easy installation
    • Seals tight, retains resiliency and pressure
    • Resistant to acids, alkalies, fungus and UV light
    • No special tools or heat source required
     More...
    Specifications
    Agency Approvals
    ANSI C119.1
    Brand
    3M™
    Cable Outside Diameter (metric)
    19 mm
    Cable Shielding
    Non-shielded
    Cable Type
    Power Cable
    Colour Family
    Black
    Conductor Material
    Aluminum, Copper
    Conductor Size Range
    10 - 70 mm²
    Conductor Sizes
    1 AWG, 1/0 AWG, 2 AWG, 2/0 AWG, 4 AWG, 6 AWG, 8 AWG
    Connector Included
    No
    Connector Maximum Outside Diameter
    0.687 in
    Connector Maximum Outside Diameter (metric)
    17.0 mm
    Dielectric Strength (V/mil)
    365 V/mil
    Elongation
    750 %
    Indoor/Outdoor
    Both
    Insulation O.D. Range
    0.20-0.75 in
    Insulation O.D. Range (Metric)
    5-19 mm
    Insulation Outer Diameter (Imperial)
    0.2 in, 0.21 in, 0.22 in, 0.23 in, 0.24 in, 0.25 in, 0.26 in, 0.27 in, 0.28 in, 0.29 in, 0.3 in, 0.31 in, 0.32 in, 0.33 in, 0.34 in, 0.35 in, 0.36 in, 0.37 in, 0.38 in, 0.39 in, 0.4 in, 0.41 in, 0.42 in, 0.43 in, 0.44 in, 0.45 in, 0.46 in, 0.47 in, 0.48 in, 0.49 in, 0.5 in, 0.51 in, 0.52 in, 0.53 in, 0.54 in, 0.55 in, 0.56 in, 0.57 in, 0.58 in, 0.59 in, 0.6 in, 0.61 in, 0.62 in, 0.63 in, 0.64 in, 0.65 in, 0.66 in, 0.67 in, 0.68 in, 0.69 in, 0.7 in, 0.71 in, 0.72 in, 0.73 in, 0.74 in, 0.75 in
    Insulation Outer Diameter (metric)
    10.16 mm, 10.414 mm, 10.668 mm, 10.922 mm, 11.176 mm, 11.43 mm, 11.684 mm, 11.938 mm, 12.192 mm, 12.446 mm, 12.7 mm, 12.954 mm, 13.208 mm, 13.462 mm, 13.716 mm, 13.97 mm, 14.224 mm, 14.478 mm, 14.732 mm, 14.986 mm, 15.24 mm, 15.494 mm, 15.748 mm, 16.002 mm, 16.256 mm, 16.51 mm, 16.764 mm, 17.018 mm, 17.272 mm, 17.526 mm, 17.78 mm, 18.034 mm, 18.288 mm, 18.542 mm, 18.796 mm, 19.05 mm, 5.08 mm, 5.334 mm, 5.588 mm, 5.842 mm, 6.096 mm, 6.35 mm, 6.604 mm, 6.858 mm, 7.112 mm, 7.366 mm, 7.62 mm, 7.874 mm, 8.128 mm, 8.382 mm, 8.636 mm, 8.89 mm, 9.144 mm, 9.398 mm, 9.652 mm, 9.906 mm
    Manufacturing Origin
    USA
    Maximum Connector Length
    2.50 in
    Maximum Connector Length (metric)
    63 mm
    Maximum Connector O.D.
    0.687 in
    Maximum Connector O.D. (metric)
    17 mm
    Model
    Cold Shrink
    Number of Conductors
    3
    Product Colour
    Black
    Product Technology
    Cold Shrink
    Product Type
    Splice
    Splice Type
    Cold Shrink
    Voltage
    1 kV
    Voltage Rating
    0.6/1 kV
    Details
    • Quick and easy installation
    • Seals tight, retains resiliency and pressure
    • Resistant to acids, alkalies, fungus and UV light
    • No special tools or heat source required
    • Accommodates a very wide range of cable sizes
    • RoHS 2011/65/EU Compliant and ANSI Certified

    3M™ Cold Shrink Quick Splice Low Voltage QSLV-M provides quick, reliable insulation and protection for secondary low-voltage splices. Mastic rings at each end provide remarkably wide wire range. Fits 8 AWG to 2/0 AWG.

    3M™ Cold Shrink Low Voltage QSLV-M provides quick, reliable insulation and protection for secondary low-voltage splices. The 8-2/0 tube fits 8 AWG to 2/0 AWG and is designed as primary electrical insulation for solid dielectric insulated wire and cable splices rated to 1000 volts. Mastic rings at each end provide remarkably wide wire range. In fact, the two QSLV-M tubes together offer three times the wire range on traditional cold applied products. After installation, a solid internal core remains inside to protect against impact damage. Installation is easy with no torch or tools required. It provides reliable sealing and long-term durability. The tubes are designed to resist fungus, acids and alkalis, and have passed testing for ANSI C119.1. It can be used for direct bury or submersible applications on either aluminum or copper splices.

    Suggested Applications

    • Primary electrical insulation for 8 AWG–500 kcmil solid dielectric (rubber and plastic) insulated wire and cable splicing rated to 1000 volts, direct bury or submersible
    • Insulation of secondary splices, copper or aluminum conductors
    • Direct bury or submersible applications
    Contact a Representative

    We’re here to help.

    All fields are required.

    • Enter your 10-digit phone number. Numbers only (5555555555).

    3M will use the information to respond to your request and in accordance with our Privacy Policy.

    3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications, which may include promotions, product information and service offers.

    Loading wheel
    A green circle with a checkmark inside.
    Thank you for contacting us.

    Our goal is to respond to your request within 1-2 business days. Some questions, however, may need further investigation so that we can provide you with an appropriate response.

    A red circle with an x inside.
    Sorry!

    We can’t seem to complete your request. Please try again.

    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français