1. All 3M Products
  • 3M™ Heat Shrink Thin-Wall Tubing, FP-301, clear, 4 in (10.16 cm)
  • 3M™ Heat Shrink Thin-Wall Tubing, FP-301, clear, 4 in (10.16 cm)

    3M ID 7100083169
    • Rated for 135°C (275° F) continuous operation
    • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
    • 2:1 shrink ratio
    • Flexible and split resistant
     More...
    Specifications
    Brand
    3M™
    Color Family
    Transparent
    Elongation
    400 Decibel
    Expanded Inner Diameter
    4 Inch
    Expanded Inner Diameter (metric)
    101.6 mm
    Flame Retardant
    No
    Flammability Rating
    No Flame Rating
    Identifier
    3M™ Heat Shrink Thin-Wall Tubing, FP-301, clear, 4 in (10.16 cm)
    Inner Diameter After Shrink (Imperial)
    2 Inch
    Inner Diameter After Shrink (Metric)
    50.8 mm
    Inner Diameter Before Shrink (Imperial)
    4 Inch
    Inner Diameter Before Shrink (Metric)
    101.6 mm
    Manufacturing Origin
    USA
    Material
    Flexible Polyolefin
    Maximum Operating Temperature (Celsius)
    135 Degree Celsius
    Maximum Operating Temperature (Fahrenheit)
    275 Degree Fahrenheit
    Mil Spec
    AMS-DTL-23053/5, Class 2
    Minimum Expanded Tubing I. D.
    4 Inch
    Minimum Shrink Temperature (Celsius)
    100 Degree Celsius
    Non-Corrosive
    Yes
    Operating Temperature (Celsius)
    -55 to 135 Degrees Celsius
    Operating Temperature Range (Celsius)
    -55 °C to +135 °C
    Operating Temperature Range (Fahrenheit)
    -67 °F to 275 °F
    Org_Code
    HA
    Overall Length (Imperial)
    50 ft
    Product Key
    FP18 FP301 4 FPA
    Recovered Inner Diameter
    2 Inch
    Recovered Inner Diameter (metric)
    50.8 mm
    Shrink Ratio
    2:1
    Solution for
    Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories
    TDS Required
    Yes
    Tensile Strength (Imperial)
    2400 Pound-Force Per Square Inch
    Tubing Type
    Single Wall (Thin)
    UL File Number
    E-39100
    Units per Case
    1
    Details
    • Rated for 135°C (275° F) continuous operation
    • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
    • 2:1 shrink ratio
    • Flexible and split resistant
    • Rated for 600V applications

    3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.

    3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.

    Suggested Applications

    • Typically used as shrink-fit electrical insulation over cable splices and terminations
    • Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
    Contact a Representative
    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français