3M™ Heat Shrink Thin-Wall Tubing, FP-301, green, 1 in x 50 ft (2.54 cm x 15.24 m) spool
|
|
|
|---|---|
|
Brand
|
3M™
|
|
Color Family
|
Green
|
|
Dielectric Strength
|
900 Volt
|
|
Elongation
|
400 Percent
|
|
Expanded Inner Diameter
|
1 Inch
|
|
Expanded Inner Diameter (metric)
|
25.40 mm
|
|
Flame Retardant
|
Yes
|
|
Flammability Rating
|
UL 224 All Tubing Flame Test
|
|
Identifier
|
3M™ Heat Shrink Thin-Wall Tubing, FP-301, green, 1 in x 50 ft (2.54 cm x 15.24 m) spool
|
|
Inner Diameter After Shrink (Imperial)
|
0.5 Inch
|
|
Inner Diameter After Shrink (Metric)
|
12.7 mm
|
|
Inner Diameter Before Shrink (Imperial)
|
1 Inch
|
|
Inner Diameter Before Shrink (Metric)
|
25.4 mm
|
|
Manufacturing Origin
|
USA
|
|
Material
|
Flexible Polyolefin
|
|
Maximum Operating Temperature (Celsius)
|
135 Degree Celsius
|
|
Maximum Operating Temperature (Fahrenheit)
|
275 Degree Fahrenheit
|
|
Mil Spec
|
AMS-DTL-23053/5, Class 1
|
|
Minimum Expanded Tubing I. D.
|
1 Inch
|
|
Minimum Shrink Temperature (Celsius)
|
100 Degree Celsius
|
|
Non-Corrosive
|
Yes
|
|
Operating Temperature (Celsius)
|
-55 to 135 Degrees Celsius
|
|
Operating Temperature Range (Celsius)
|
-55 °C to +135 °C
|
|
Operating Temperature Range (Fahrenheit)
|
-67 °F to 275 °F
|
|
Org_Code
|
HA
|
|
Overall Length (Imperial)
|
50 ft
|
|
Overall Length (Metric)
|
15.24 Meter
|
|
Product Colour
|
Green
|
|
Product Key
|
FS12 FP-SM 1.0 FPA
|
|
Recovered Inner Diameter
|
0.5 Inch
|
|
Recovered Inner Diameter (metric)
|
12.7 mm
|
|
Shrink Ratio
|
2:1
|
|
Solution for
|
Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories
|
|
TDS Required
|
Yes
|
|
Tensile Strength (Imperial)
|
2400 Pound-Force Per Square Inch
|
|
Tubing Type
|
Single Wall (Thin)
|
|
UL File Number
|
E-39100
|
|
Units per Case
|
3
|
- Rated for 135°C (275° F) continuous operation
- Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
- 2:1 shrink ratio
- Flexible and split resistant
- Rated for 600V applications
3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.
3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.
Suggested Applications
- Typically used as shrink-fit electrical insulation over cable splices and terminations
- Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
3M Canada
Canada - English | Français
