1. 3M Canada
  • 3M™ Heat Shrink Thin-Wall Tubing, FP-301, yellow, 1/16 in x 48 in (0.16 cm x 121.92 cm)
  • 3M™ Heat Shrink Thin-Wall Tubing, FP-301, yellow, 1/16 in x 48 in (0.16 cm x 121.92 cm)

    3M ID 7000133633
    • Rated for 135°C (275° F) continuous operation
    • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
    • 2:1 shrink ratio
    • Flexible and split resistant
     More...
    Specifications
    Agency Approvals
    CSA, UL Recognized
    Brand
    3M™
    Color Family
    Yellow
    Elongation
    175 %, 400 %
    Expanded Inner Diameter
    0.063 in
    Expanded Inner Diameter (metric)
    1.6 mm
    Flame Retardant
    Yes
    Flammability Rating
    UL 224 All Tubing Flame Test
    Inner Diameter After Shrink (Imperial)
    0.031 in
    Inner Diameter After Shrink (Metric)
    0.787 mm
    Inner Diameter Before Shrink (Imperial)
    0.063 in
    Inner Diameter Before Shrink (Metric)
    1.6 mm
    Material
    Polyolefin
    Maximum Operating Temperature (Celsius)
    135 °C
    Maximum Operating Temperature (Fahrenheit)
    275 °F
    Mil Spec
    SAE-AMS-DTL-23053/5, Class 1
    Minimum Expanded Tubing I. D.
    0.063 in
    Minimum Shrink Temperature (Celsius)
    100 °C
    Non-Corrosive
    Yes
    Operating Temperature (Celsius)
    -55 to 135 Degrees Celsius
    Operating Temperature (Fahrenheit)
    -67 °F to 275 °F
    Operating Temperature Range (Celsius)
    -55 °C to +135 °C
    Operating Temperature Range (Fahrenheit)
    -67 °F to 275 °F
    Overall Length (Imperial)
    48 in
    Overall Length (Metric)
    1.219 m
    Product Colour
    Yellow
    Product Form
    48 in (1.22 m) sticks
    Product Key
    FP01 FP301 FPA
    Recovered Inner Diameter
    0.031 in
    Recovered Inner Diameter (metric)
    0.8 mm
    Shrink Ratio
    2:1
    Size
    0.0625 Inch
    Size (metric)
    1.59 mm
    Solution for
    Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories
    Tensile Strength (Imperial)
    2400 Pound-Force Per Square Inch
    Tubing Type
    Single Wall (Thin)
    UL Bug Temperature (Celsius)
    125 Degrees Celsius
    UL Bug Temperature (Fahrenheit)
    257 Degrees Fahrenheit
    UL Bug Voltage
    600 Volt
    UL File Number
    E-39100
    Units per Case
    25
    Details
    • Rated for 135°C (275° F) continuous operation
    • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
    • 2:1 shrink ratio
    • Flexible and split resistant
    • Rated for 600V applications

    3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.

    3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.

    Suggested Applications

    • Typically used as shrink-fit electrical insulation over cable splices and terminations
    • Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
    Contact a Representative
    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français