1. All 3M Products

3M™ Scotch-Weld™ Acrylic Adhesive DP805

products
Colour
Net Weight
Volume
Volume (metric)
Product Form
products found
Filter options:
 Colour, Net Weight, Volume, Volume (metric) and Product Form
Product Results
Close
Specifications
Adhesive Type
Acrylic
Applications
Alternatives to Rivetting or Welding, Impact resistant, Mounting and Trim Attachment, Panel & Trim Bonding, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Colour
Light Yellow, Off-White
Consumer Label
No
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Flame Retardant
ASTM E162, ASTM E662, Boeing BSS 7239
Full Cure
8-24 Hours @ 72 F (22 C)
Hardness
79 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Fahrenheit)
175 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator
1 : 1
Net Weight
16.5
Open Time
3-4 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Set Time
4 Minute
Shear Strength at 72 Degrees F (22 Degrees C)
3500 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
9
Specific Gravity
0.99
Storage Temperature
40 F (4.5 C), 60-80 F (16-27 C), 72 Degree Fahrenheit
Substrate 1
Oily, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon)
Substrate 2
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood, Wood & Hardboard
Substrates
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood, Wood & Hardboard
Viscosity
Self-Leveling
Viscosity Range (cps) at Room Temperature
110,000, Base: 75,000, Accelerator: 150,000
Volume
1.6 Fluid Ounce (US), 13.5 Fluid Ounce (US)
Volume (metric)
400 Millilitre, 47 Millilitre
Details

3M™ Scotch-Weld™ Acrylic Adhesive DP805 is a two-part MMA-based adhesive with a 1:1 mix ratio. It has a three minute worklife and reaches handling strength in 10 minutes. This adhesive is part of a B/A system. 3M™ Scotch-Weld™ Acrylic Adhesive 805 has high overlap shear and peel strength with good impact and durability to metals, wood and most plastic surfaces.

Other 3M Sites:
Partner Portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français