1. All 3M Products

3M™ Scotch-Weld™ Acrylic Adhesive DP825

products
Colour
Volume
Volume (metric)
products found
Filter options:
 Colour, Volume and Volume (metric)
Product Results
Close
Specifications
Adhesion Strength
320 oz/in
Adhesive Type
Acrylic
Applications
Impact resistant, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Colour
Off-White, Yellow
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
4-24 Hours @ 73 F (23 C)
Hardness
70 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
79 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
175 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator
1 : 1
Open Time
25 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Set Time
10 to 30 Minute
Shear Strength at 72 Degrees F (22 Degrees C)
3600 Pound-Force Per Square Inch, 3700 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
0.97
Storage Temperature
72 F (22 C)
Substrate 1
Paints (Powder Coat, Painted Metal, Composite Panel), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon)
Substrate 2
Glass, HSE Plastics and Glass, Metal, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood
Substrates
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood, Wood & Hardboard
Viscosity Range (cps) at Room Temperature
Base: 35,000, Accelerator: 75,000
Volume
1.6 Fluid Ounce (US), 13.5 Fluid Ounce (US)
Volume (metric)
400 Millilitre, 47 Millilitre
Details

3M™ Scotch-Weld™ Acrylic Adhesive DP825 is a two-part MMA-based adhesive with a 1:1 mix ratio. It has a 25 minute worklife and handling strength in 40 minutes. This product is part of a B/A system. 3M™ Scotch-Weld™ Acrylic Adhesive DP825 has high overlap shear and peel strength with good impact and durability to metals, wood and most plastic surfaces.

Other 3M Sites:
Partner Portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français