1. All 3M Products

3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS

products
Volume
Volume (metric)
products found
Filter options:
 Volume and Volume (metric)
Product Results
Close
Specifications
Adhesive Type
Acrylic
Applications
Impact resistant, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Consumer Label
No
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
24 Hours @ 73 F (23 C)
Indoor/Outdoor
Both
Industries
Aerospace, Appliance, Automotive, Communications, Construction, Consumer Goods, Electronics, General Industrial, Metalworking, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Mix Ratio Volume Base:Accelerator
10 : 1
Open Time
4-6 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Set Time
4 Minute
Shear Strength at 72 Degrees F (22 Degrees C)
4100 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
18
Storage Temperature
72 Degree Fahrenheit
Substrate 2
Glass & Ceramics, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
Substrates
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood, Wood & Hardboard
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
75,000
Volume
1.58 Fluid Ounce (US), 17.25 Fluid Ounce (US)
Volume (metric)
45 Millilitre, 490 Millilitre
Work Time
4-6 Minutes
Details

3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS is a toughened, non-sag, two part MMA based adhesive. It has a 10:1 mix ratio, a 5 minute worklife, and handling strength in approximately 14 minutes. It adheres to a variety of plastics or metals, including those with slightly oily surfaces. It fully cures in 24 hours at room temperature. The 3M™ Manual Applicator 490 ml and Mix Nozzles (not included) are required for use.

Other 3M Sites:
Partner Portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français