1. All 3M Products

3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS

3M ID 7100011056
  • 5-minute work life with 20 minutes to structural strength
  • Bonds to a variety of surfaces, including most metals and plastics
  • Features spacer beads to control bond line thickness
 More...
Specifications
Adhesive Type
Acrylic
Applications
Impact resistant, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
3M™, Scotch-Weld™
Colour
Green
Consumer Label
No
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
24 Hours @ 73 F (23 C)
Indoor/Outdoor
Both
Industries
Aerospace, Appliance, Automotive, Communications, Construction, Consumer Goods, Electronics, General Industrial, Metalworking, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Mix Ratio Volume Base:Accelerator
10 : 1
Open Time
4-6 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Set Time
4 Minute
Shear Strength at 72 Degrees F (22 Degrees C)
4100 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
18
Storage Temperature
72 Degree Fahrenheit
Substrate
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood, Wood & Hardboard
Substrate 1
Glass, Glass & Ceramics, Metal, Oily, Paint, Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Smooth, Wood, Wood & Hardboard
Substrate 2
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Smooth, Wood, Wood & Hardboard
Units per Case
12, 6
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
75,000
Volume (Imperial)
1.58 fl oz, 17.25 fl oz
Volume (metric)
45 mL, 490 mL
Work Time
4-6 Minutes
Details
  • 5-minute work life with 20 minutes to structural strength
  • Bonds to a variety of surfaces, including most metals and plastics
  • Features spacer beads to control bond line thickness

3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS is a non-sag, tough, two-part acrylic adhesive. This adhesive provides improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product with a fast rate of strength build to provide structural strength in just minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS is a non-sag acrylic adhesive with a 10:1 mix ratio. It features a 5-minute work life to allow time to position substrates prior to adhesion. This adhesive's work life, open time, and cure length can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 19 minutes, increasing throughput and productivity while featuring a high peel and impact performance. 3M™ Scotch-Weld™ Acrylic Adhesive DP8405NS should yield similar results as 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS, which has been tested for surface flammability, smoke, toxic gas generation, and caloric content.

Suggested Applications

  • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
  • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
  • Bonding plastics, composites, and powder coats to metal
  • Typically used where fast assembly of smaller parts is required
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français