1. All 3M Products

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS

products
  • 11-minute work life with 36 minutes to structural strength
  • Durable bond with excellent shear, peel, and high impact strength
  • Bonds to a variety of surfaces, including most metals and plastics
  • High-strength with minimal surface prep
 More...
Volume
Volume (metric)
products found
Filter options:
 Volume and Volume (metric)
Product Results
Close
Specifications
Adhesive Type
Acrylic
Applications
Impact resistant, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Colour
Green
Consumer Label
No
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
24 Hours @ 73 F (23 C)
Indoor/Outdoor
Both
Industries
Aerospace, Appliance, Automotive, Composite, Construction, Consumer Goods, Electronics, General Industrial, Marine, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
149 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
175 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator
10 : 1
Open Time
10 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge
Product Type
Acrylic Adhesive
Set Time
10 Minute
Shear Strength at 72 Degrees F (22 Degrees C)
4100 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
18
Storage Temperature
72 Degree Fahrenheit
Substrate
Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Wood, Wood & Hardboard
Substrate 1
Glass, Glass & Ceramics, Metal, Oily, Paint, Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Smooth, Wood, Wood & Hardboard
Substrate 2
Glass & Ceramics, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Wood & Hardboard
Units per Case
12, 6
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
35,000-75,000
Volume
1.58 Fluid Ounce (US), 17.25 Fluid Ounce (US)
Volume (metric)
45, 45 Millilitre, 490 Millilitre
Work Time
10-12 Minutes
Details
  • 11-minute work life with 36 minutes to structural strength
  • Durable bond with excellent shear, peel, and high impact strength
  • Bonds to a variety of surfaces, including most metals and plastics
  • High-strength with minimal surface prep
  • Features spacer beads to control bond line thickness

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS is a non-sag, two-part acrylic adhesive. It is a durable adhesive that features a fast rate of strength build to provide structural strength in just minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS is a non-sag, acrylic adhesive with a 10:1 mix ratio. It features an 11-minute work life time to allow time to position substrates prior to adhesion. This working life, open time, and cure length can be altered with heat to decrease the cure time. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 36 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours. 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details. 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS has been tested for surface flammability, smoke, toxic gas generation, and caloric content. Acrylic adhesives are two-part methyl methacrylate adhesives (MMA) that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. Acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a long shelf life.

Suggested Applications

  • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
  • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
  • Bonding plastics, composites, painted and powder coated metal
  • Typically used where fast assembly of smaller parts is required
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français