1. All 3M Products

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS

products
  • 23-minute work life with 53 minutes to structural strength
  • Durable bond with excellent shear, peel, and high impact strength
  • Bonds a variety of surfaces, including most metals and plastics
  • High strength with minimal surface prep
 More...
Volume (metric)
products found
Filter options:
 Volume (metric)
Product Results
Close
Specifications
Adhesive Type
Acrylic
Applications
Impact resistant, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Colour
Green
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure
24 Hour
Indoor/Outdoor
Both
Industries
Metalworking, Signage, Specialty Vehicle, Woodworking
Maximum Operating Temperature (Celsius)
149 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
175 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator
10 : 1
Position
Best
Product Form
Cartridge
Set Time
10 to 30 Minute
Shelf Life in Months (from date of manufacture)
18
Storage Temperature
<80 Degree Fahrenheit
Substrate
EPDM Rubber, Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Smooth, Wood, Wood & Hardboard
Substrate 1
EPDM Rubber, Glass, Glass & Ceramics, Metal, Oily, Paint, Plastic, Easy-to-Bond (HSE), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Smooth, Wood, Wood & Hardboard
Substrate 2
EPDM Rubber, Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Oily, Paint, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rubber (Except EPDM), Smooth, Wood, Wood & Hardboard
Viscosity
Non-Sag
Volume
1.58 Fluid Ounce (US), 17.25 Fluid Ounce (US)
Volume (metric)
45 Millilitre, 490 Millilitre
Work Time
22-24 Minutes
Details
  • 23-minute work life with 53 minutes to structural strength
  • Durable bond with excellent shear, peel, and high impact strength
  • Bonds a variety of surfaces, including most metals and plastics
  • High strength with minimal surface prep
  • Features spacer beads to control bond line thickness

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag, two-part acrylic adhesive. This tough adhesive offers improved adhesion to many plastics and metals, including those with slightly oily surfaces. It is a durable product that features a fast rate of strength build to provide structural strength in just minutes.

3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS is a non-sag acrylic adhesive with a 10:1 mix ratio. It features a 23-minute work life to allow time to position substrates prior to adhesion. This working life, open time and cure time can be accelerated with heat. Once fully cured, this adhesive will reach 1,000 psi (7 MPa) of overlap shear strength in approximately 53 minutes, increasing throughput and productivity while featuring a high peel and impact performance. Full cure will be reached within 24 hours. 3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS green has been recognized by Underwriters Laboratories (UL) for use in electrical equipment and electric signs. Please review UL File QOQW2. MH17478 and Sign Components Manual (SAM) File E464624 for details. 3M™ Scotch-Weld™ Acrylic Adhesive DP8425NS should yield similar results as 3M™ Scotch-Weld™ Acrylic Adhesive DP8410NS Green, which has been tested for surface flammability, smoke, toxic gas generation, and caloric content.

Suggested Applications

  • Metalworking such as HVAC, appliance, sporting goods, and specialty vehicles
  • Sign manufacturing such as panel to frame bonding, trim attachment, letter bonding, and frame assembly
  • Bonding plastics, composites, and powder coats to metal
  • Typically used for larger parts where a longer open time is needed for assembly
Contact a rep
  • Do you have an assembly challenge? Connect with a 3M rep for a solution.

    *Indicates a required field.


  • Enter your 10-digit phone number. Numbers only. eg. 5555555555

3M will use this information to respond to your request for expert advice and in accordance with our Privacy Policy.



3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.


Ask a 3M Rep Loading wheel



Thank you for submitting your request. A 3M representative will be contacting you to help answer any of your bonding and assembly questions.

Thank you,
Your 3M Brand Industrial Adhesives and Tapes Division

Sorry! We can’t seem to complete your request. Please try again.