1. All 3M Products

3M™ Scotch-Weld™ Epoxy Adhesive 2214

  • Pliable paste consistency goes where needed with no sagging
  • Contains no aluminum powders and cures cream-coloured
  • Excellent adhesion to metals at temperatures up to 250°F (121°C)
 More...
Product Results
Close
Specifications
Adhesive Type
Epoxy
Applications
Impact resistant, Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Flame Retardant
UL94 HB
Full Cure
40 Minutes @ 250 F (121 C)
Hardness
85 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
121 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
175, 175 Degree Fahrenheit
Physical Form
Paste
Position
Best
Product Form
Tube
Product Type
Epoxy Adhesive
Set Time
>25 Minutes
Shear Strength at 72 Degrees F (22 Degrees C)
4000 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
8
Specific Gravity
1.2, 1.44
Storage Temperature
40 Degree Fahrenheit, 40 F (4.5 C)
Substrate
ABS, Acrylic, Ceramic, EPDM, Glass, HSE Plastics and Glass, Metal, Metal (Unpainted), Nylon, PVC, Rubber (Except EPDM), Smooth, Wood
Substrate 1
Glass, HSE Plastics and Glass, Metal, Smooth
Substrate 2
Glass, HSE Plastics and Glass, Metal, Metal (Unpainted), Smooth
Units per Case
4, 6
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
50 - 200, 60-200
Details
  • Pliable paste consistency goes where needed with no sagging
  • Contains no aluminum powders and cures cream-coloured
  • Excellent adhesion to metals at temperatures up to 250°F (121°C)

3M™ Scotch-Weld™ Epoxy Adhesive 2214 is a non-metallic adhesive that contains no aluminum powders and cures to a cream-colour (not gray). This adhesive is designed to provide high strength, high temperature resistance, and smooth bond lines. It features slightly lower thermal conductivity than other 2214 epoxies, with higher dielectric strength.

Our 3M™ Scotch-Weld™ Epoxy Adhesive 2214 is a non-metallic adhesive designed for use in applications where high strength bonds are needed in a temperature range of -67°F to 250°F (-53°C to 121°C). It can cure at 248°F (120°C). This epoxy adhesive may be applied by spatula, trowel, or flow equipment to meet your individual project requirements. Epoxy adhesives are part of the class of adhesives called "structural adhesives," which include polyurethane, acrylic, cyanoacrylate, and others. Epoxies are formulated as liquid reactive polymers that undergo a chemical reaction when mixed and then cure to form a solid plastic material. Once the two parts are mixed in their specified ratio, they begin the curing process and offer a limited working time where the adhesive can be applied and the two surfaces positioned as needed. This work life lasts anywhere from a few minutes to several hours. These structural adhesives provide high shear and peel strengths, depending on the formula, and better heat and chemical resistance than other common adhesives. In general, epoxy adhesives have the highest overall strength and offer the best performance and most resistance to high temperatures, solvents, and outdoor weathering.

Suggested Applications

  • Ideal for assembly, assembling joining, attaching, securing, repairing, panel bonding, adhering, and structural bonding applications
  • Metal to metal bonding
  • Alternative to riveting or welding, bolt setting, frame building, rivet free assembly
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français