1. All 3M Products

3M™ Scotch-Weld™ Gasket Maker GM10

  • Used as form-in-place gaskets
  • Eliminates the need for pre-cut gaskets, reducing weight, inventory, and cost
  • Cures at room temperature and seals rigid assemblies of any shape or size
  • Withstands temperatures up to 400°F (204°C)
 More...
Product Results
Close
Specifications
Adhesive Type
Anaerobic
Applications
Gasket Assembly
Brand
Scotch-Weld™
Colour
Red
Flashpoint
>=212 Degree Fahrenheit
Flexibility
Rigid
Full Cure
24 Hours @ 72 F (22 C)
Indoor/Outdoor
Indoor
Industries
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
204 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
400 Degree Fahrenheit
Physical Form
Paste
Position
Good
Product Form
Tube
Set Time
24 Hours
Shear Strength at 72 Degrees F (22 Degrees C)
750 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
1.15
Storage Temperature
72 Degree Fahrenheit
Substrate
Rigid Metal and Flanges
Substrate 1
Rigid Metal and Flanges
Substrate 2
Rigid Metal and Flanges
Units per Case
10
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
120-150, 80,000-250,000
Work Time
20 Minutes
Details
  • Used as form-in-place gaskets
  • Eliminates the need for pre-cut gaskets, reducing weight, inventory, and cost
  • Cures at room temperature and seals rigid assemblies of any shape or size
  • Withstands temperatures up to 400°F (204°C)
  • Does not shrink, crack, sag, or run
  • For use on rigid flanges and to seal metal assemblies

3M™ Scotch-Weld™ Gasket Maker GM10 is a red, rigid, single-component anaerobic sealant formulated to replace pre-cut gaskets and O-rings or to use as form-in-place gaskets. They cure at room temperature and seal rigid assemblies of any shape or size. They can be used to fill pits, scratches, and gouges in the flange surface without having to grind or skim the mating surfaces.

Our 3M™ Scotch-Weld™ High Temperature Gasket Maker GM10 can be applied straight from the tube or by tracing, roll coating, or screen printing to provide an instant low-pressure seal, eliminating the need for pre-cut gaskets, reducing weight, inventory, and costs. In the absence of oxygen and in the presence of metal, this modified urethane acrylate (in paste form) cures quickly to a polymer that seals, secures, and retains. 3M™ Scotch-Weld™ High Temperature Gasket Maker GM10 withstands temperatures as high as 400°F (204°C), and does not shrink, crack, sag or run for use on rigid flanges, and to seal metal assemblies. Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough cross-linked plastic that provides aggressive adhesion with effective shear strength.

Suggested Applications

  • Vehicle repair and maintenance
  • Gearbox and engine casings
  • Fuel and water pumps
  • Auto thermostats
  • Air and liquid filters
  • Fluid handling equipment
  • Heat exchangers
  • Ball joints
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français