1. All 3M Products

3M™ Scotch-Weld™ Gasket Maker GM18

3M ID 7100039211
  • Used as form-in-place gaskets
  • Eliminates the need for pre-cut gaskets, reducing weight, inventory, and cost
  • Cures at room temperature and seals rigid assemblies of any shape or size
  • Withstands temperatures up to 300°F (148°C)
 More...
Specifications
Adhesive Type
Anaerobic
Applications
Bonding, Gasket Assembly, Impact resistant, Vibration resistant
Brand
Scotch-Weld™
Colour
Red
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Flashpoint
>=212 Degree Fahrenheit
Flexibility
Flexible
Full Cure
24 Hours @ 72 F (22 C)
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Medical, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
148 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
300 Degree Fahrenheit
Physical Form
Paste
Position
Good
Product Form
Tube
Set Time
10 to 30 Minute, 24 Hours
Shear Strength at 72 Degrees F (22 Degrees C)
750 Pound-Force Per Square Inch
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
1.09
Storage Temperature
72 Degree Fahrenheit
Substrate
Metal, Very rough surfaces
Substrate 1
Metal, Very Rough Surfaces
Substrate 2
Metal, Very rough surfaces
Units per Case
10
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
300,000-700,000
Work Time
35 Minutes
Details
  • Used as form-in-place gaskets
  • Eliminates the need for pre-cut gaskets, reducing weight, inventory, and cost
  • Cures at room temperature and seals rigid assemblies of any shape or size
  • Withstands temperatures up to 300°F (148°C)
  • Does not shrink, crack, sag, or run
  • For use on rigid flanges and to seal metal assemblies

3M™ Scotch-Weld™ Gasket Maker GM18 is a red, flexible, single-component anaerobic sealant formulated to replace pre-cut gaskets and O-rings or to use as form-in-place gaskets. They cure at room temperature and seal rigid assemblies of any shape or size. They can be used to fill pits, scratches, and gouges in the flange surface without having to grind or skim the mating surfaces.

Our 3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 can be applied straight from the tube or by tracing, roll coating, or screen printing to provide an instant low-pressure seal, eliminating the need for pre-cut gaskets, reducing weight, inventory, and costs. In the absence of oxygen and in the presence of metal, this modified urethane acrylate (in paste form) cures quickly into a polymer that seals, secures, and retains. 3M™ Scotch-Weld™ High Temperature Gasket Maker GM18 withstands temperatures as high as 300°F (148°C) and does not shrink, crack, sag or run for use on rigid flanges and to seal metal assemblies. Anaerobic adhesives are uniquely formulated to cure in the absence of oxygen. The term "anaerobic" means "living without air" and when the oxygen is excluded, a chemical chain reaction begins that causes the adhesive to polymerize. Contact with metal speeds the polymerization process and rapidly accelerates the curing process, forming tough, cross-linked plastic that provides aggressive adhesion with effective shear strength. More commonly referred to as threadlockers, pipe sealants, retaining compounds, and gasket makers, these adhesives are often used to enhance the seal, or holding force, in the threads of joined fastener systems such as nut-and-bolt assemblies. A nut-and-bolt assembly may have as little as 15% metal-to-metal contact and even a small amount of anaerobic adhesive readily fills any air voids between the threads and then hardens to a thermoset plastic. These unique adhesives are easy to dispense, cure rapidly, and provide effective torque strength while resisting temperature and vibration and sealing out moisture and gasses to protect against corrosion. Anaerobic adhesives can decrease manufacturing costs, enhance equipment reliability, minimize aftermarket breakdown, and reduce warranty claims.

Suggested Applications

  • Vehicle repair and maintenance
  • Gearbox and engine casings
  • Fuel and water pumps
  • Auto thermostats
  • Air and liquid filters
  • Fluid handling equipment
  • Heat exchangers
  • Ball joints
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français