1. All 3M Products

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810NS

  • Low-odour adhesive is ideal for any setting where harsh fumes or flammability are an issue
  • Delivers non-sag formulation so adhesive stays where applied
  • Provides high shear and peel strength and is toughened for impact resistance
  • Bonds most plastics, composites, and metals
 More...
Product Results
Close
Specifications
Adhesion Strength
320 oz/in
Adhesive Type
Acrylic
Applications
Alternatives to Rivetting or Welding, Impact resistant, Mounting and Trim Attachment, Panel & Trim Bonding, Panel to Frame/Stiffner to Panel Assembly, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Consumer Label
No
Design Challenges
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
Full Cure Time
8-24 Hours @ 72 F (22 C)
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
79 Degree Celsius
Maximum Operating Temperature (Fahrenheit)
175 Degree Fahrenheit
Mix Ratio Volume Base:Accelerator
1 : 1
Open Time
10 minutes @ 72 F (22 C)
Physical Form
Flowable Liquid
Position
Best
Product Form
Cartridge, Each, Liter
Product Type
Acrylic Adhesive
Set Time
10 Minute
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
1.07
Storage Temperature
32 F (0 C), <=40 Degree Fahrenheit
Substrate
ABS, Ceramic, Elastomers, EPDM, Glass, Glass & Ceramics, HSE Plastics and Glass, Metal, Metal (Painted), Metal (Unpainted), Nylon, Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Polyolefins, PVC, Rubber, Rubber (Except EPDM), Smooth, Stone, Thermoplastic Elastomers, Vinyl Plasticized, Wood, Wood & Hardboard
Substrate 1
Ceramic, Elastomers, Glass, Metal, Metal (Painted), Metal (Unpainted), Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastic, Easy-to-Bond (HSE), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Rubber, Smooth, Stone, Vinyl Plasticized, Wood
Substrate 2
Ceramic, Elastomers, Glass, HSE Plastics and Glass, Metal, Metal (Painted), Metal (Unpainted), Oily, Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Rubber, Rubber (Except EPDM), Smooth, Stone, Vinyl Plasticized, Wood
Units per Case
1, 12, 6
Viscosity
Non-Sag
Viscosity Range (cps) at Room Temperature
90,000, 90,000-95,000, 95,000, 95,000-100,000
Work Time
10 Minutes
Details
  • Low-odour adhesive is ideal for any setting where harsh fumes or flammability are an issue
  • Delivers non-sag formulation so adhesive stays where applied
  • Provides high shear and peel strength and is toughened for impact resistance
  • Bonds most plastics, composites, and metals

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810NS is a non-sag, toughened, two-part acrylic adhesive specially formulated to bond oily metals, plastics and other surfaces. This low odour adhesive cures at room temperature and has non-flammable properties, meaning it contributes to a safer work environment.

This unique acrylic gives you the strong shear and peel strength as well as good impact resistance for durability to meet your demanding end-use applications. 3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810NS makes work safer, faster, and more efficient. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. The non-sag formula creates rigid adhesion. With a mix ratio is 1:1, 3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810NS provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.) Acrylic adhesives, often referred to as epoxy adhesives or epoxy glue, are two-part adhesives that provide excellent bond strength and durability, although slightly lower adhesion than 2 part epoxy in some situations. However, acrylic glues have several features that make them easier to use, including a much faster cure speed, higher tolerance for oily or unprepared bonding surfaces and the ability to bond a wide variety of materials, including nearly all plastics. Newer acrylic adhesive formulations are room temperature stable with a moderate shelf life.

Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français