1. All 3M Products
  • 3M™ Scotchcast™ Inline Resin Power Cable Splice Kit, 82-A1, up to 2 AWG
  • 3M™ Scotchcast™ Inline Resin Power Cable Splice Kit, 82-A1, up to 2 AWG

    3M ID 7000006147
    • UL Listed for direct burial and submerged applications up to 600 volts and 90°C
    • Rated to 5kV for inline splices on unshielded, synthetic insulated cables
    • Rated to 1 kV for multiple conductor cables
    • Unshielded, synthetic insulated cables
     More...
    Specifications
    Applications
    Sealing, electrical insulation and mechanical protection
    Brand
    Scotchcast™
    Conductor Size Range
    8-2 AWG
    Conductor Sizes for 5 kV
    10 AWG, 12 AWG, 14 AWG, 16 AWG, 18 AWG, 2 AWG, 4 AWG, 8 AWG
    Insulation O.D. Range
    0.406 - 0.625 Inch
    Material
    Epoxy
    Maximum Cable Outside Diameter
    0.60 in
    Maximum Cable Outside Diameter (metric)
    15.2 mm
    Product Series
    82-A Series
    Product Technology
    Resin
    Product Type
    Splice
    RoHS 2011/65/EU Compliant
    Yes
    RoHS EU Comments
    RoHS 2011/65/EU compliant without exemption
    *Important RoHS information
    Splice Type
    Inline
    Units per Case
    10
    Voltage
    1 kV, 5 kV
    Voltage Application
    Medium Voltage
    Details
    • UL Listed for direct burial and submerged applications up to 600 volts and 90°C
    • Rated to 5kV for inline splices on unshielded, synthetic insulated cables
    • Rated to 1 kV for multiple conductor cables
    • Unshielded, synthetic insulated cables
    • Each kit contains one mold body, two pouring spouts, three strips of Scotch® Rubber Splicing Tape 23 and one pack of 3M™ Scotchcast™ Electrical Insulating Resin 4

    The 3M™ Scotchcast™ Inline Resin Power Cable Splice Kit in the 82-A series is UL Listed 486D, file Number E102356. The connector is not included and must be ordered separately. Each 3M™ Scotchcast™ Inline Resin Power Cable Splice Kit makes one splice.

    The 3M™ Scotchcast™ Inline Resin Power Cable Splice Kit 82-A is designed for use in weather-exposed or direct-burial locations. It is used for making inline (straight) splices on unshielded, synthetic insulated cables rated up to a maximum of 5kV and for multiple conductor cables rated up to a maximum of 1kV. UL Listed for direct burial and submerged applications up to 600 volts and 90°C (194ºF) and is for use with UL Listed connectors only.

    Suggested Applications

    • Designed for weather exposed or direct burial locations
    • Irrigation system connections
    • To be used with UL Listed connectors only (not included)
    Contact a Representative
    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français