1. All 3M Products
  • Scotch® High Temperature Fine Line Tape, 4737T, translucent blue, 304 mm x 32.91 m
  • Scotch® High Temperature Fine Line Tape, 4737T, translucent blue, 304 mm x 32.91 m

    3M ID 7100046289
    • Conformable and translucent to allow visual confirmation of adhesive wet out and alignment on substrate
    • Natural rubber adhesive for good instant adhesion
    • Heat-resistant
     More...
    Specifications
    Adhesive Type
    Rubber
    Applications
    Paint
    Backing Material
    Vinyl
    Colour
    Blue
    Indoor/Outdoor
    Indoor
    Industries
    Automotive, Electronics, Furniture, General Industrial, Metalworking, Military and Government, Specialty Vehicle, Transportation, Woodworking
    Length
    36 yd
    Length (Metric)
    32.91 m
    Maximum Operating Temperature (Celsius)
    149 Degree Celsius
    Maximum Operating Temperature (Fahrenheit)
    300 Degree Fahrenheit
    Product Form
    Roll
    Shelf Life in Months (from date of manufacture)
    12
    Tensile Strength (Imperial)
    16 lb/in
    Tensile Strength (metric)
    280
    Thickness
    5.4 Milli-inch (mil)
    Thickness (Metric)
    0.13 mm
    Units per Case
    12
    Width
    12 in
    Width (Metric)
    304 mm
    Details
    • Conformable and translucent to allow visual confirmation of adhesive wet out and alignment on substrate
    • Natural rubber adhesive for good instant adhesion
    • Heat-resistant

    Scotch® High Temperature Fine Line Tape 4737TL is a vinyl paint masking tape for fascia, rocker panels, two-tone paint and other multiple colour applications where critical paint break lines are required.

    Scotch® High Temperature Fine Line Tape 4737TL has a vinyl backing that is designed for uniform stretching to help create better paint lines. It will give outstanding fine line colour separation. The adhesive and backing work together to help reduce paint seepage to a minimum. It can be used with most solvent or water-based paint systems. Translucent with low glare to allow visual confirmation of adhesive wet out on substrate. Conformable allowing ease of application in areas of tight radii and depressions. Vinyl backing is heat resistant for one piece removal to help save time. Designed for indoor use only as it should not be subjected to outdoor exposure. Typical physical and performance characteristics include: thickness: 5.1 mils, adhesion to steel: 14 oz./in. width, tensile strength: 16 lbs./in. width, elongation at break: 150%, temperature use range: up to 325°F (162.8°C).

    Suggested Applications

    • Transportation, aerospace, automotive, commercial vehicle, RV, bus, truck, ship yards, military, metal working, furniture, electronics, solar, trailer manufacturing and woodworking
    • Sealing, holding, bundling, reinforcing, identifying, tabbing, wrapping, paint masking, splicing and protecting
    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français