1. All 3M Products
  • Scotch® Rough Surface Painter's Tape 2060
  • Scotch® Rough Surface Painter's Tape 2060

    3M ID B00012577
    • 5-day clean removal leaves behind no damage or sticky residue
    • Bonds aggressively, yet has a smooth unwind
    • Very strong adhesive for the toughest surfaces
    • Conforms to corners, edges, and straight lines
     More...
    Specifications
    Adhesiveness
    Strong
    Adhesive Type
    Rubber
    Applications
    Paint, Paint Masking, Painting & Depainting, Woodworking
    Backing Material
    Paper
    Brand
    Scotch®
    Colour
    Green
    Elongation at Break
    11%
    Indoor/Outdoor
    Indoor
    Material
    Paper
    Package Contents
    1 Roll/Pack
    Product Series
    2060
    Recommended Surfaces
    Brick, Concrete, Glass, Grout, Lacquer applications, Metal, Mortar, Plaster, Plastic, Stone, Stucco
    Removal Time
    5 day clean removal
    Size
    0.70 in x 60.1 yd, 0.94 in x 60.1 yd, 1.41 in x 60.1 yd, 1.88 in x 60 yd
    Size (metric)
    18 mm x 55 m, 24 mm x 55 m, 36 mm x 55 m, 48 mm x 55 m
    Surface Type
    Heavy Texture, Light Texture, Smooth
    Total Tape Thickness without Liner (Imperial)
    6.6 Milli-inch (mil)
    Total Tape Thickness without Liner (metric)
    0.17 mm
    UV Resistant
    Yes
    Details
    • 5-day clean removal leaves behind no damage or sticky residue
    • Bonds aggressively, yet has a smooth unwind
    • Very strong adhesive for the toughest surfaces
    • Conforms to corners, edges, and straight lines
    • Easily mark up tape with measurements or notes
    • Versatile tape for use by professionals and homeowners alike

    Scotch® Rough Surface Painter’s Tape has a very strong adhesive designed for performance on rough, non-damageable surfaces. Use on brick, concrete, stucco, or rough wood for the protection you need to get the job done. Scotch® Rough Surface Painter’s Tape is recommended for use with or on lacquer coatings. This tape holds to surfaces for up to 5 days and then removes easily without leaving any sticky residue behind.

    For great paint results, make sure the surface is clean, dry, and dust-free so that the tape sticks properly. Next, apply the Scotch® Rough Surface Painter's Tape onto the surface while pressing down firmly as you go. Let the tape set for about 30 to 60 minutes before painting for an optimal bond. Once finished painting, make sure the paint is completely dry before removing the tape. To properly lift it up, start by slowly pulling the tape back on itself before removing at a 45-degree angle.

    Suggested Applications

    • Designed for use on concrete, brick, stucco, and rough wood
    • Recommended for use with or on lacquer coatings
    Other 3M Sites:
    Partner portal
    Follow Us
    The brands listed above are trademarks of 3M. Used under license in Canada.
    Change Location
    Canada - English | Français