1. All 3M Products

Scotch® Rough Surface Painter's Tape 2060

products
  • 5-day clean removal leaves behind no damage or sticky residue
  • Bonds aggressively, yet has a smooth unwind
  • Very strong adhesive for the toughest surfaces
  • Conforms to corners, edges, and straight lines
 More...
Overall Length (Imperial)
Overall Width (Imperial)
Overall Width (Metric)
Size
products found
Filter options:
 Overall Length (Imperial), Overall Width (Imperial), Overall Width (Metric) and Size
Product Results
Close
Specifications
Adhesiveness
Strong
Adhesive Type
Rubber
Applications
Paint, Paint Masking, Painting & Depainting, Woodworking
Backing Material
Paper
Brand
Scotch®
Colour
Green
Elongation at Break
11%
Indoor/Outdoor
Indoor
Material
Paper
Package Contents
1 Roll/Pack
Product Series
2060
Recommended Surfaces
Brick, Concrete, Glass, Grout, Lacquer applications, Metal, Mortar, Plaster, Plastic, Stone, Stucco
Removal Time
5 day clean removal
Size
0.70 in x 60.1 yd, 0.94 in x 60.1 yd, 1.41 in x 60.1 yd, 1.88 in x 60 yd
Size (metric)
18 mm x 55 m, 24 mm x 55 m, 36 mm x 55 m, 48 mm x 55 m
Surface Type
Heavy Texture, Light Texture, Smooth
Total Tape Thickness without Liner (Imperial)
6.6 Milli-inch (mil)
Total Tape Thickness without Liner (metric)
0.17 mm
UV Resistant
Yes
Details
  • 5-day clean removal leaves behind no damage or sticky residue
  • Bonds aggressively, yet has a smooth unwind
  • Very strong adhesive for the toughest surfaces
  • Conforms to corners, edges, and straight lines
  • Easily mark up tape with measurements or notes
  • Versatile tape for use by professionals and homeowners alike

Scotch® Rough Surface Painter’s Tape has a very strong adhesive designed for performance on rough, non-damageable surfaces. Use on brick, concrete, stucco, or rough wood for the protection you need to get the job done. Scotch® Rough Surface Painter’s Tape is recommended for use with or on lacquer coatings. This tape holds to surfaces for up to 5 days and then removes easily without leaving any sticky residue behind.

For great paint results, make sure the surface is clean, dry, and dust-free so that the tape sticks properly. Next, apply the Scotch® Rough Surface Painter's Tape onto the surface while pressing down firmly as you go. Let the tape set for about 30 to 60 minutes before painting for an optimal bond. Once finished painting, make sure the paint is completely dry before removing the tape. To properly lift it up, start by slowly pulling the tape back on itself before removing at a 45-degree angle.

Suggested Applications

  • Designed for use on concrete, brick, stucco, and rough wood
  • Recommended for use with or on lacquer coatings
Other 3M Sites:
Partner portal
Follow Us
The brands listed above are trademarks of 3M. Used under license in Canada.
Change Location
Canada - English | Français