3M™ Novec™ Electronic Grade Coating, 2701

  • Easy application and processing – dries in seconds without the need for postapplication curing
  • Can be easily removed for rework and repair using 3M™ Novec™ Engineered Fluids
  • Is UV detectable for easy identification of coating and quality control
  • Allows solder-through repairability
 More...
View all details
Product Results
Close
Specifications
Application Method
Dip, Selective Dispense, Spray
Applications
Anti-stiction, Chemical Protection, Corrosion Protection, Moisture Protection, Protecting
Brand
Novec™
Coating Location
Electronic Device Components
Coating Thickness Range (Metric)
<1 nm
Dielectric Constant
2.8
Dielectric Strength
3700 V/mil
Dissipation Factor
0.011
Net Weight (Imperial)
0.18 lb, 11 lb
Pack or Case Quantity
1/case
Polymer Type
Fluoroacrylate
Product Series
Novec 2701
Removability
Removable with 3M™ Novec™ Engineered Fluid 7200, Removable with 3M™ Novec™ Engineered Fluid 72DA
Specifications Met
RoHS 2011/65/EU
Thermal Cure Time & Temperature
No Need to Cure
UV Detectable
Yes
Details
  • Easy application and processing – dries in seconds without the need for postapplication curing
  • Can be easily removed for rework and repair using 3M™ Novec™ Engineered Fluids
  • Is UV detectable for easy identification of coating and quality control
  • Allows solder-through repairability
  • Contains less than 1% volatile organic compounds (VOCs) and has low global warming potential
  • Is thermally and electrically stable with good dielectric properties
  • Provides excellent repellency, antiwetting and anti-sticking properties against liquids – water, hydrocarbons, silicones, and photoresists

3M™ Novec™ Electrical Grade Coating 2701 is a fluorinated polymer solution in a hydrofluoroether solvent. Designed for moisture and corrosion protection of printed circuit boards and electronic components, the coating dries to a thin, clear film.

3M™ Novec™ Electrical Grade Coating 2701 does not need curing and is easy to apply, remove and repair. Both the solution and polymer are low in toxicity, non-ozone depleting and RoHS compliant. The coating contains a yellow-orange dye that is built into the polymer and designed to fluoresce under UV light to aid the inspection of the coating and quality control of the coating process. Trust 3M™ Novec™ Electronic Grade Coating 2701 for conformal, waterproof coating on electronic circuits.

Suggested Applications

  • Adheres to a variety of materials (metals, glass, ceramics, polymers, composites, laminates)
  • Has low surface energy which allows lubricating oils, silicones, photoresist solutions, etc. to bead and drain freely from coated surfaces
Ask an expert

Send us a message

* Indicates a required field.

3M will use this information only for the purpose of responding to your request and in accordance with our Privacy Policy .


I would like to receive electronic messages, which may include promotions, product information and service offers, from 3M. I understand that I may unsubscribe at any time using the opt-out link provided in every electronic message.

3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications which may include promotions, product information and service offers.


Loading wheel
Thank you for requesting a demo! Logo

Thank you for contacting us

We will respond to your request within 2-3 business days. Some questions, however, may need further investigation so that we can provide you with an appropriate response.

Sorry Logo

Sorry!

We can’t seem to complete your request. Please try again.