Offering a high inside-to-outside flow capacity, 3M™ High Flow HFR Series Retrofit Filter Cartridges have an absolute retention rating to help remove particles and other contaminants from water, industrial chemicals and liquid food and beverages*. Using 3M’s multi-layer media, these high flow retrofit filters fit into third-party inside-to-outside flow housings and help reduce operating costs.
3M™ High Flow HFR Series Retrofit Filter Cartridge
3M™ High Flow HFR Series Filter Cartridges feature our Advanced Pleat Technology (APT) with wide pleated filters to maximize the usable filtration area for an increased flow capacity and a long filter life for numerous applications. The result is a higher flow rate with fewer filters for a more sustainable solution. The robust O-ring reduces the chance of fluid bypass.
3M’s tightly controlled specifications during the manufacturing process create a filter media with absolute-rated particle retention characteristics.
3M’s APT design increases flow capacity and the usable filtration area.
3M’s lofted microfibre filtration media designed for applications containing organic and/or biological contaminants helps improve performance for a longer filter life.
Designed to accommodate high flow rates for industrial applications, 3M™ High Flow HFR Series Filter Cartridges require fewer filters to maintain your process flow requirements.
For details related to specific use conditions or limitations for food contact applications, please contact your 3M Representative for more information.
Constructed of a polypropylene microfibre media, 3M pleated filter cartridges have a uniform matrix, effluent quality and a high particle removal efficiency throughout the filter life. The lofted media design helps prevent premature blinding of the filter’s outer surface, promoting fuller utilization of the media, resulting in an optimum combination of particle removal efficiency and contaminant holding capability.
Ideal for a wide range of industrial filtration applications, the 3M™ High Flow HFR Series Microfibre Filter Media is optimized for use in process water applications containing organic contaminants, as well as particulates. 3M™ High Flow HFR Series Filter Cartridges are available in 6 distinct absolute micron ratings ranging from 5 to 100 microns and 3 integral lengths, 20, 40 and 60 inches, to fit third-party filter housings. All filter components are thermally bonded to provide a structurally integral filter. No resins, binders or adhesives are used in the manufacturing process.