1. Canada
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Cold Shrink Splices
  6. 3M™ Cold Shrink Quick Splice Low Voltage QSLV-M-2-500, Non-Shielded, 1 kV, 10/Case

3M™ Cold Shrink Quick Splice Low Voltage QSLV-M-2-500, Non-Shielded, 1 kV, 10/Case

  • 3M ID 7000058805
  • UPC 00051128572375

Rubber sleeve with sealing mastic provides a water-resistant sealing

Factory-expanded for easy installation

For direct-bury, secondary low-voltage, non-shielded cable splices

View more details

Details

Highlights
  • Rubber sleeve with sealing mastic provides a water-resistant sealing
  • Factory-expanded for easy installation
  • For direct-bury, secondary low-voltage, non-shielded cable splices
  • Rated for up to 1 kV applications
  • Splices both aluminum and copper conductors
  • RoHS 2011/65/EU Compliant and ANSI Certified

The 3M™ Cold Shrink Quick Splice Low Voltage provides quick, reliable insulation and protection for secondary low-voltage splices. The 8-2/0 tube fits 2 AWG to 500 kcmil. Mastic rings at each end provide remarkably wide wire range.

The 3M™ Cold Shrink Quick Splice Low Voltage is an open-ended tubular rubber sleeve with sealing mastic on each end which is factory expanded and assembled onto a unique three-core system. Two cores, one on each end, are removed after the QSLV-M insulator has been centred over an inline connector, allowing the ends of the tube to shrink and form a water-resistant seal. The third, centre segment of the core remains inside the cold shrink tube, acting as a support structure. Sizing of the cores and tube, along with the sealing mastic on each end, is designed to accommodate the variance in connectors and connector crimping techniques and final dimensions without degrading the seal and insulating characteristics of the EPDM rubber tube, while also making core removal easy.

Typical Properties