3M™ Wraparound Heat Shrink Cable Repair Sleeve, HDCW-35/10-500, 35mm/10mm- 500mm
- Quick and easy to apply
- Provides maximum protection against mechanical stress
- Achieves a safe, watertight bond
- Corrosion proof metal clip fully closes the sleeve
|
|
|
|---|---|
|
Adhesive Lined
|
Yes
|
|
Adhesive Material
|
Hot-melt adhesive
|
|
Agency Approvals
|
ANSI C119.1
|
|
Brand
|
3M™
|
|
Cable Type
|
Any type of cable
|
|
Chemical Resistant
|
Yes
|
|
Colour Family
|
Black
|
|
Elongation
|
3 %
|
|
Expanded Inner Diameter
|
1.97 in
|
|
Expanded Inner Diameter (metric)
|
50 mm
|
|
Flame Retardant
|
No
|
|
Inner Diameter After Shrink (Imperial)
|
0.315 in
|
|
Inner Diameter After Shrink (Metric)
|
8 mm
|
|
Inner Diameter Before Shrink (Imperial)
|
1.969 in
|
|
Inner Diameter Before Shrink (Metric)
|
50 mm
|
|
Jacket Repair Range
|
0.39 to 1.38 Inch
|
|
Material
|
Adhesive-lined, Cross-Linked Polyolefin
|
|
Maximum Operating Temperature (Celsius)
|
130 °C
|
|
Maximum Operating Temperature (Fahrenheit)
|
266 °F
|
|
Maximum Voltage Rating
|
1 kV to 35 kV
|
|
Minimum Shrink Temperature (Celsius)
|
120 °C
|
|
Operating Temperature Range (Celsius)
|
-30 °С to +130 °C
|
|
Overall Diameter (Metric)
|
50 mm, 50 mm
|
|
Overall Length (Imperial)
|
19.685 in
|
|
Overall Length (Metric)
|
500 mm
|
|
Product Colour
|
Black
|
|
Product Form
|
Sleeve-roll
|
|
Product Type
|
Heat Shrink Sleeve
|
|
Sleeve Length
|
500 mm
|
|
Splice Configuration
|
Heat Shrink Cable Repair Wrap Sleeve (HDCW)
|
|
Splice Type
|
Heat Shrink
|
|
UV Resistant
|
Yes
|
- Quick and easy to apply
- Provides maximum protection against mechanical stress
- Achieves a safe, watertight bond
- Corrosion proof metal clip fully closes the sleeve
3M™ Wraparound Heat Shrink Cable Repair Sleeves are designed to repair damaged cable sheaths. They are also suitable for use with cable joints or as additional corrosion protection on undamaged cables.
3M™ Wraparound Heat Shrink Cable Repair Sleeves help provide maximum protection against mechanical stress, even in the most aggressive environments. Coated with hot melt adhesive, the inner wall of the sleeve is able to achieve a safe and watertight bond with the cable, providing a perfect seal when heat is applied. A corrosion proof metal clip is used to fully close the sleeve.
Suggested Applications
- Ideal for cable jacket repair on cables up to 35kV
- Use as additional corrosion protection on undamaged cables
- Can be used as primary insulation on low voltage cables up to 1000V
Our goal is to respond to your request within 1-2 business days. Some questions, however, may need further investigation so that we can provide you with an appropriate response.
We can’t seem to complete your request. Please try again.
