1. Canada
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920HS, Pink, 54 in x 25 yd (1372 mm x 22.86 m), 20 mil (0.5 mm), 1 Roll/Case

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920HS, Pink, 54 in x 25 yd (1372 mm x 22.86 m), 20 mil (0.5 mm), 1 Roll/Case

  • 3M ID 7000124288
  • UPC 50051115250120

Pink, flexo plate mounting tape with air release feature

High plate side adhesion

Provides high quality light-medium combination print

View more details

Details

Highlights
  • Pink, flexo plate mounting tape with air release feature
  • High plate side adhesion
  • Provides high quality light-medium combination print
  • The adhesives remove cleanly from the print plate and the print cylinder
  • Securely bonds flexographic photopolymer plates to urethane sleeves to prevent plate edge lifting

The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920HS is a 0.020 inch (0.51 mm) thick pink, double coated foam tape has the air release feature with high plate side adhesion, as well as higher cylinder side adhesion to stick to sleeves.

Bubble Free Flexographic Plate Mounting 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1920HS is a pink foam tape that provides high quality combination print. This is the light medium tape for combination print. It has the air release feature that allows for bubble free mounting. This tape has excellent resistance to lifting on press allowing for clean plate removal. Recommended Applications • Mounting photopolymer plates to flexographic printing urethane sleeves • Used in combination, process and solid printing processes • 3M sticky back tapes are designed for wide-web presses to print film or paper for flexible packaging industry 3M flexographic plate mounting tapes are highly engineered to provide very tight caliper tolerance to allow printers to use tape from different manufacturing lots and keep tight print registration. The compressible foam will withstand long and high speed print runs. This cushion tape is manufactured for 20 mil applications. It is constructed with engineered acrylic adhesives. The adhesive on the linered (plate) side of the tape is designed for mounting of photopolymer plates. The adhesive on the non-linered (sleeve) side is designed for mounting to flexographic printing urethane sleeves, providing easy application at mounting and clean removal when demounting. On Easy with Reduced Air Entrapment 3M air release liners have a crosshatched pattern, unlike other mounting tapes that use a pebbled or flat release liner. The embossed crosshatched pattern imprints unique micro-channels into the easy mount adhesive that allows entrapped air to escape. Air bubbles disappear from between the tape and plate, and between the tape and sleeve or cylinder for virtually bubble-free mounting. Setup is faster with smoother surfaces for cleaner print quality and higher productivity. The adhesive maintains tight contact with reduced edge lifting. Keep the Presses Running and Your Customers Coming Back For decades, 3M products have been at work in printing plants helping to improve the quality of the work that goes out and the efficiency of how it gets done.

Suggested applications
  • Good for flexographic printing and flexographic printers
  • Used to mount flexographic print plates

Typical Properties