1. Canada
  2. All 3M Products
  3. Medical
  4. Patient Monitoring
  5. Electrodes
  6. 3M™ Red Dot™ Neonatal Pre-Wired Limb Band Monitoring Electrode, 2284, 0.9 in x 0.7 in (2.2 cm x 1.7 cm), 18 in (45.72 cm) radiolucent leadwire, 3 per bag

3M™ Red Dot™ Neonatal Pre-Wired Limb Band Monitoring Electrode, 2284, 0.9 in x 0.7 in (2.2 cm x 1.7 cm), 18 in (45.72 cm) radiolucent leadwire, 3 per bag

3M ID 7000128623UPC 50707387468571
  • Made with a gentle adhesive that helps reduce the risk of skin trauma
  • Radiolucent
  • Smaller size for neonates
 More...
View all details
Specifications
Age Group
Neonatal
Brand
Red Dot™
Case Packaging
3 Electrodes/Package; 100 Packages or 300 Electrodes/Case
Electrode Size
0.9" x 0.7"
Electrode Type
Infant Pre-wired, Monitoring, Neonatal Pre-wired, Pre-wired
Gel Type
Conductive Adhesive
Material
Soft Cloth
Model
2284
Monitoring Event
Pediatric Monitoring
Overall Length (Imperial)
0.9 in
Overall Length (Metric)
2.3 cm
Overall Width (Imperial)
0.7 in
Overall Width (Metric)
1.8 cm
Package Contents
3 Electrodes/Package
Patient
Neonatal, Pediatric
Pre-Wired
Yes
Product Type
Electrode
Product Use
Monitoring
Radiolucency
Radiolucent
Size (Imperial)
0.7 in x 0.9 in
Size (Metric)
1.8 cm x 2.3 cm
Skin Prep Included
No
Skin Type
Fragile, Normal
Solution
Monitoring, Pediatrics, Pre-wired
Details
  • Made with a gentle adhesive that helps reduce the risk of skin trauma
  • Radiolucent
  • Smaller size for neonates

Specially designed for neonatal patients, 3M™ Red Dot™ Neonatal Monitoring Electrode are pre-wired for ease of application and trace quality.

How to apply

Application instructions

Person cleaning the skin where the electrode will be placed

Prepare the skin. Application sites must be clean, dry, and free of any body lotions. Cleaning with isopropyl alcohol should be avoided or limited to situations in which electrode adhesion is an issue (exessively oily or lotion covered skin). If alchohol is used, allow it to dry prior to electrode application.

Person making an X on the skin wtith the abrader

Excessive hair at the site should be removed by clipping. Gently abrade the skin on the back of some electrode (blue strip or gray disc) or 3M™ Red Dot™ Trace Prep. Make an X on the skin with the abrader. Apply the electrode and then gently rub around the electrode to set the pressure sensitive adhesive.

Person applying the electrode to the patients shoulder

Apply the electrode. If using snap connection leadwires, connect the leadwires to the electrodes onto the patient. Avoid pressing on the stud when the electrode is on the patient. After placing the electrode on the patient, round your finger around the front label to activate the pressure sensitive adhesive.

Removal instructions

Person removing the electrode

Remove. In order to remove, loosen one side of the electrode. Grasping the full width of the electrode, slowly and gently pull it back over itself.

Electrodes should be removed in the direction of hair growth whenever possible. Keep the electrode close to the skin surface as you pull it back, and support the skin immediately adjacent to the adhesive being removed.

Contact a representative

All fields are required.

  • Enter your 10-digit phone number. Numbers only (5555555555).
  • Please confirm your information is correct.

3M will use the information to respond to your request and in accordance with our Privacy Policy.



3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications, which may include promotions, product information and service offers.


Loading wheel

Thank you for contacting us! Logo
Thank you!

Your request has been submitted successfully. A representative will contact you shortly.

Sorry Logo

Sorry!

We can’t seem to complete your request. Please try again.