1. Canada
  2. All 3M Products
  3. Electrical
  4. Wire & Cable
  5. Tubing & Molded Parts
  6. Heat Shrink Tubing
  7. 3M™ Heat Shrink Thin-Wall Tubing, FP-301, green, 1/4 in x 48 in (0.64 cm x 121.92 cm)

3M™ Heat Shrink Thin-Wall Tubing, FP-301, green, 1/4 in x 48 in (0.64 cm x 121.92 cm)

3M ID 7000133501UPC 50051128595836
  • Rated for 135°C (275° F) continuous operation
  • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
  • 2:1 shrink ratio
  • Flexible and split resistant
 More...
View all details
Specifications
Additional Flammability Rating
23053/5 class1
Agency Approvals
UL Recognized, CSA Certified, ABS, and AMS 3636 & 3637
Applicable SAE-AMS-DTL-23053 Specifications
23053/5 class 1
Brand
3M™
Colour Family
Green
Elongation
400 %
Expanded Inner Diameter
0.25 in
Expanded Inner Diameter (metric)
6.35 mm
Flame Retardant
Yes
Flammability Rating
UL 224 All Tubing Flame Test
Inner Diameter After Shrink (Imperial)
0.125 in
Inner Diameter After Shrink (Metric)
3.17 mm
Inner Diameter Before Shrink (Imperial)
0.25 in
Inner Diameter Before Shrink (Metric)
6.35 mm
Manufacturing Origin
USA
Material
Polyolefin
Maximum Operating Temperature (Celsius)
135 °C
Maximum Operating Temperature (Fahrenheit)
275 °F
Mil Spec
AMS-DTL-23053/5, Class 1
Minimum Expanded Tubing I. D.
1 in
Minimum Shrink Temperature (Celsius)
100 °C
Non-Corrosive
Yes
Operating Temperature (Celsius)
-55 to 135 Degrees Celsius
Operating Temperature (Fahrenheit)
-67 °F to 275 °F
Operating Temperature Range (Celsius)
-55 °C to +135 °C
Operating Temperature Range (Fahrenheit)
-67 °F to 275 °F
Overall Length (Imperial)
48 in
Overall Length (Metric)
1220 mm
Product Colour
Green
Product Form
48 in (1.22 m) sticks
Product Key
FP01 FP301 FPA
Recovered Inner Diameter
0.125 in
Recovered Inner Diameter (metric)
3.18 mm
Shrink Ratio
2:1
Size (metric)
6.35 mm
Solution for
Access Network: FTTH/FTTB/CATV, Access Network: xDSL, Longhaul/Metro Loop Network: Outdoor, Wireless Network: Backhaul, Wireless Network: Infrastructure Accessories
Tensile Strength (Imperial)
2400 Pound-Force Per Square Inch
Tubing Type
Single Wall (Thin)
UL Bug Temperature (Celsius)
125 Degrees Celsius
UL Bug Temperature (Fahrenheit)
257 Degrees Fahrenheit
UL Bug Voltage
600 Volt
Units per Case
12
Details
  • Rated for 135°C (275° F) continuous operation
  • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
  • 2:1 shrink ratio
  • Flexible and split resistant
  • Rated for 600V applications
  • Flame-retardant tubing is rated for 600V applications

3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.

3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.

Suggested Applications

  • Typically used as shrink-fit electrical insulation over cable splices and terminations
  • Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering
Contact a Representative