1. Canada
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Flexible Adhesives
  5. Hot Melt Adhesives
  6. 3M™ Scotch-Weld™ Hot Melt Adhesive, 3762LM-22LB, light amber

3M™ Scotch-Weld™ Hot Melt Adhesive, 3762LM-22LB, light amber

  • 3M ID 7100023281
  • UPC 50021200491301

Aggressive hot tack rapidly achieves handling strength

Short open time allows for fast assembly lines

Securely bonds difficult to seal substrates such as lightly waxed surfaces

View more details
Frequently viewed resources
Safety Data Sheet (PDF, 0B)
Find a Preferred Partner

Details

Highlights
  • Aggressive hot tack rapidly achieves handling strength
  • Short open time allows for fast assembly lines
  • Securely bonds difficult to seal substrates such as lightly waxed surfaces
  • Low viscosity prevents stringing even at fast production speeds

3M™ Scotch-Weld™ Hot Melt Adhesive 3762 is a 100% solids, fast-setting hot melt adhesive designed for packaging and shipping applications. It is ideal for bonding corrugated fibreboard cartons, wood, particle board, chipboard, and foam.

3M™ Scotch-Weld™ Hot Melt Adhesive 3762LM-22LB is 100% solids, thermoplastic resin formulated to grab and seal quickly to meet the demands of high-volume production settings such as packing, woodworking, and assembly. hese features increase the speed of carton closures and provide adhesion to wood, paperboard, corrugated, and other fibrous substrates. It provides strong shear strength, which means your packages stay sealed and components stay bonded under most conditions. A 25 second open time, along a 1/8 in (0.32 cm) bead, is sufficient for positioning and adjusting for fit and supports high-tempo productivity for packaging, woodworking, and applications that involve fibrous materials. The low viscosity prevents stringing even at fast production speeds. Hot melt adhesives, also known as glue sticks, are liquefied thermoplastic adhesives available in both low and high-temperature versions. Low temperature hot melt adhesives are applied at 250°F/121°C temperatures, which makes them ideal for bonding electronics, plastics, cloth, and other heat sensitive materials. High temperature hot melt adhesives are applied at 380°F/193°C and produce a stronger bond than the low temperature hot melts. Melted adhesive is extruded through a nozzle using a 3M™ Scotch-Weld™ Hot Melt Applicator by either pneumatic pressure, a mechanical trigger mechanism, or with pressure applied directly on the stick. Different nozzles can be used to apply thin, wide strips or narrow, thicker beads. Hot melt adhesive generally sets quickly, ranging from a few seconds to a few minutes, depending on the adhesive formulation.

Suggested applications
  • General packaging
  • Securing wood supports and reinforcements
  • Repacking chipboard
  • Point-of-purchase displays
  • Trade exhibits
  • Bonding waxed surfaces

Typical Properties

Resources

Contact a Sales Rep