1. Canada
  2. All 3M Products
  3. Tapes
  4. Flexographic Plate Mounting Tapes
  5. 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 24 in x 25 yd (609.6 mm x 22.86 m), 20 mil (0.5 mm), 1 Roll/Case, Sample

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H, Tan, 24 in x 25 yd (609.6 mm x 22.86 m), 20 mil (0.5 mm), 1 Roll/Case, Sample

3M ID 7100044472
  • Tan, flexo plate mounting tape with air release feature
  • High plate side adhesion
  • Provides high quality process print
  • The adhesives remove cleanly from the print plate and the print cylinder
 More...
View all details
Specifications
Adhesive Type
Differential Acrylate
Air Release
Yes
Application Thickness (Imperial)
20 mil
Application Thickness (Metric)
0.508 mm
Backing Material
Polyethylene Foam
Brand
Cushion-Mount™
Colour Family
Beige
Composite Sleeves
No
Industries
Print
Overall Length (Imperial)
25 yd
Overall Length (Metric)
22.86 m
Overall Thickness (Imperial)
22 mil
Overall Width (Imperial)
24 in
Overall Width (Metric)
609.6 mm
Primary Liner
Polycoated Polyester
Primary Liner Thickness (Imperial)
4.5 mil
Primary Liner Thickness (Metric)
0.11 mm
Print Quality
Process Printing
Print Quality (Series)
11 Series
Product Colour
Tan
Product Form
Roll
Size (Imperial)
24 in x 25 yd
Size (Metric)
609.6 mm x 22.86 m
Total Tape Thickness without Liner (Imperial)
22 mil
Total Tape Thickness without Liner (metric)
0.56 mm
Units per Case
1
Urethane Sleeves
Yes
Warranty Period
2 Years from Date of Manufacture
Details
  • Tan, flexo plate mounting tape with air release feature
  • High plate side adhesion
  • Provides high quality process print
  • The adhesives remove cleanly from the print plate and the print cylinder

The 3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive is designed for mounting flexographic print plates to cylinders or sleeves. This tan foam mounting tape provides high quality process print.

3M™ Cushion-Mount™ Plus Plate Mounting Tape E1120H with easy mount adhesive and higher plate side adhesive is designed for mounting flexographic print plates to cylinders or sleeves. It provides high quality tone reproduction where process printing is important. Our Easy Mount liner creates micro channels in both adhesive surfaces. The crosshatched pattern creates a continuous and permanent network of micro channels in the adhesive, allowing air to escape from between the tape and cylinder/sleeve and between the tape and plate. The adhesive on the linered side (plate side) of the tape is designed for mounting photopolymer plates, has excellent holding power on press and clean plate removal when demounting. The adhesive on the non linered side (cylinder side) of the tape is designed for mounting to flexographic printing cylinders or sleeves, providing easy application at mounting and clean removability when demounting.

Suggested Applications

  • Good for flexographic printing and flexographic printers