3M™ Adhesive Transfer Tape 9775WL is designed for permanently bonding plastics, foams, wood, and textiles. The adhesive easily flows into crevices and voids without the addition of heat. Minimal pressure is required. 3M™ Adhesive Transfer Tape 9775WL features 3M™ Adhesive 300MP, a high tack acrylic that delivers good initial bond and full adhesion within 48 - 72 hours.
3M™ Adhesive Transfer Tape 9775WL features 5.0 mil (0.13 mm) of durable adhesive mounted on a 7.0 mil (0.19 mm), 96 lb. white polycoated kraft paper liner. The adhesive is designed to bond to foams, fabrics, wood, and most plastic substrates. 3M™ Adhesive Transfer Tape 9775WL resists UV and features good humidity, water, solvent, and chemical resistance. 3M™ Adhesive 300MP creates a consistently strong bond across a broad range of products up to 250°F (121°C). The easy flow properties allow the adhesive to quickly bond to rough and textured substrates, including, foam, wood, textiles, and more, without adding heat. The heavy polycoated kraft paper liner makes this adhesive tape ideal for die cutting and converting processes. 3M™ Adhesive Transfer Tapes are pressure sensitive adhesives coated on a release liner, without a scrim or carrier. These adhesive tapes are more conformable than double coated adhesive tapes for applications with textured or irregular surfaces. For application, the tape is positioned, adhesive side down, to a surface and the liner is removed, exposing the backside of the adhesive to the joining surface.