1. Canada
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Scotch-Weld™ Low Odour Acrylic Adhesive, DP810, black, 1.7 fl Oz./50 mL, 12 per case

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive, DP810, black, 1.7 fl Oz./50 mL, 12 per case

3M ID 7000000830UPC 21200490774
  • Bonding, gluing, adhering, joining, attaching, assembling, encapsulating, potting and sealing
  • 10 minute work life
  • Low odour
  • Toughened for impact resistance
 More...
View all details
Specifications
Adhesive Type
Acrylic
Applications
Alternatives to Rivetting or Welding, Panel & Trim Bonding
Brand
Scotch-Weld™
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, MRO, Specialty Vehicle, Transportation
Physical Form
Flowable Liquid
Position
Best
Shear Strength
3600 psi
Shelf Life in Months (from date of manufacture)
12
Specific Gravity
1.07
Storage Temperature
<=40 Degree Fahrenheit
Substrate
ABS, Acrylic, Ceramic, Glass, Metal, Nylon, PVC, Wood
Viscosity Range (cps) at Room Temperature
20,000
Details
  • Bonding, gluing, adhering, joining, attaching, assembling, encapsulating, potting and sealing
  • 10 minute work life
  • Low odour
  • Toughened for impact resistance
  • General industrial, sporting goods, solar energy, wind energy, composites, electronics, military, metal bonding, transportation and aerospace

3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 is a toughened, two-part acrylic adhesive. It has a 1:1 mix ratio, 10 minute work life and handling strength in approximately 10 minutes. 3M™ Scotch-Weld™ EPX™ Plus II Applicator and mix nozzles are required (not included).

This unique acrylic not only gives you strong shear and peel strength, but also good impact resistance for durability to meet demanding end-use applications. It bonds on a variety of substrates ranging from metals, composite and many plastics including nylon. With a mix ratio of 1:1, 3M™ Scotch-Weld™ Low Odour Acrylic Adhesive DP810 provides a 10-minute work life to allow time to adjust fit prior to setting. The adhesive reaches handling strength in approximately 20 minutes and is fully cured in 8-24 hours (at 72°F/22°C). (Note: excess adhesive exposed to air around the bond lines may remain tacky up to 48 hrs.)

Suggested Applications

  • Ideal for general industrial, sporting goods, solar energy, wind energy, composites, electronics, military, transportation, and aerospace applications
  • Designed for bonding, gluing, adhering, joining, attaching, assembling
  • Alternative to riveting or welding, bolt setting, frame building, rivet-free assembly