3M™ Scotchlite™ Reflective Material - 8830 Silver Strips, 25.4 mm x 101.6 mm, 10 Strips/Sheet, 50 Sheets/Case

The 3M™ Scotchlite™ Reflective Material helps enhance wearer visibility at night time or in low light conditions. The film is composed of wide angle, exposed retroreflective lenses bonded to an adhesive with an additional fabric scrim made of 94% polyester, 6% nylon tricot knit for use on helmets and rigid surfaces.

The 3M™ Scotchlite™ Reflective Material Pressure-Sensitive Adhesive Marking Film 8830 is designed for use on safety garments, athletic wear and casual wear. When properly used, reflective material helps enhance wearer visibility at night time or in low light conditions when illuminated by a light source, such as headlights, by reflecting the incident light and focusing it back towards the original source.

• Highly reflective
• High durability
• Can be die-cut, hand-cut or guillotined
• Meets the helmet requirements for National Fire Protection Association (NFPA) 1971 Standard on Protective Clothing and Equipment for Structural Fire Fighting and Proximity Fire Fighting, 2007 Edition; NFPA 1977 Standard on Protective Clothing and Equipment for Wildland Fire Fighting, 2005 Edition; NFPA 1951 Standard on Protective Ensembles for Technical Rescue Incidents, 2007 Edition
• Certified to the ANSI/ISEA 107-2010 American National Standard for High-Visibility Safety Apparel and Headwear for Level 2 retroreflective performance

Suggested Applications

• Fire apparel such as helmets and rubber boots
• General occupational helmets
• Images may be printed on the surface