1. Canada
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Two Part Structural Adhesives
  6. 3M™ Scotch-Weld™ Structural Plastic Adhesive, 8010, blue, 5 gal. (20 L) pail

3M™ Scotch-Weld™ Structural Plastic Adhesive, 8010, blue, 5 gal. (20 L) pail

3M ID 7100036720UPC 50051115716695
  • Ability to structurally bond polyolefins without special surface preparation
  • Solvent-free adhesive system
  • Excellent water and humidity resistance
  • One-step process; no pre-treatment of polyolefin substrates necessary
 More...
View all details
Specifications
Adhesive Type
Acrylic
Applications
Mounting and Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Sealing, Potting and Encapsulating, Small Joint Assembly, Structural Bonding, Vibration resistant
Brand
Scotch-Weld™
Design Challenges
Noise Vibration & Harshness Control NVH
Full Cure Time
8-24 Hours @ 72 F (22 C)
Hardness
55-60 Shore D
Indoor/Outdoor
Both
Industries
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
Maximum Operating Temperature (Celsius)
66 °C
Maximum Operating Temperature (Fahrenheit)
250 °F
Mix Ratio Volume Base:Accelerator
10 : 1
Open Time
10 Minute
Physical Form
Flowable Liquid
Position
Best
Product Form
Pail
Product Type
Structural Plastic Adhesive
Set Time
10 Minute
Shear Strength
2700 psi
Shelf Life in Months (from date of manufacture)
6
Specific Gravity
1.01
Storage Temperature
40 F (4.5 C)
Substrate
Glass, Glass & Ceramics, HSE Plastics and Glass, LSE Plastics, Metal, Paint, Plastics (ABS, PVC, Acrylic), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Smooth, Wood, Wood & Hardboard
Substrate 1
LSE Plastics
Substrate 2
Ceramic, Glass, HSE Plastics and Glass, LSE Plastics, Metal, Metal (Painted), Metal (Unpainted), Paint, Paints (Powder Coat, Painted Metal, Composite Panel), Plastics: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Plastics: LSE (Polypropylene, Polyethylene), Smooth, Stone, Wood
Units per Case
1
Viscosity
Self-Leveling
Viscosity Range (cps) at Room Temperature
20,000, 17,000-40,000, 27,000
Details
  • Ability to structurally bond polyolefins without special surface preparation
  • Solvent-free adhesive system
  • Excellent water and humidity resistance
  • One-step process; no pre-treatment of polyolefin substrates necessary
  • Convenient hand-held applicator
  • Room temperature cure

3M™ Scotch-Weld™ Structural Plastic Adhesive 8010 is a two-part, acrylic-based adhesives (10:1 ratio by volume) that can bond many low surface energy plastics, including many grades of polypropylene, polyethylene and TPO’s without special surface preparation. 3M™ Scotch-Weld™ Adhesive DP8010 can replace screws, rivets, plastic welding, and two-step processes which include chemical etchants, priming or surface treatments in many applications.

Structural bonds can be achieved without special surface treatments such as chemical etching, plasma, flame, corona treatment, or priming. Simply wipe the surfaces with isopropanol to remove mould release agents, dust dirt, etc. 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 also bonds metals, ceramics, wood, and most plastics. It is slightly flexible when cured. We also formulate this adhesive with 8 mil (0.20 mm) spacer beads for bond line spacing. Our 3M™ Scotch-Weld™ Structural Plastic Adhesive DP8010 starts with medium viscosity for controlled dispensing and spreads to sufficiently wet out the surface. The mix ratio is 10:1 and provides a 10-minute work life. The adhesive reaches handling strength in approximately 1 hour and is fully cured in 8-24 hours (at 72° F /22° C). Acrylic adhesives are two-part adhesives that provide excellent bond strength and durability. Often referred to as epoxy adhesives or epoxy glue, acrylics actually belong to a separate chemical family with their own unique characteristics. This very unique adhesive bonds LSE plastics without priming or other surface treatments.

Suggested Applications

  • Bonds low surface energy plastics
  • Bonding low surface energy plastics without priming
  • Impact-resistant composite bonding
  • Manufacture or repair of various sporting goods
  • Low surface energy plastics such as polypropylene, polyethylene and thermoplastic elastomers (TPEs)