Group Product Shot: 3M(TM) Fire Barrier Composite Sheet CS-195+, group photo used in Spec Guide

3M™ Fire Barrier Composite Sheet CS-195+

Options available
Fire Barrier Sealant IC Cartridge, 15WB, 10.1 fl. oz.,12/ case

3M™ Fire Barrier Sealant IC 15WB+

Options available
3M™ Fire Barrier Sealant is a high-performance latex-based intumescent firestop sealant. When properly installed, this product provides up to 4 hours of fire protection in tested and listed systems.

3M™ Fire Barrier Sealant CP 25WB+

Options available
The 3M™ Fire Barrier Water Tight Sealant 1000 NS is a non-slump, ready-to-use, single component, neutral cure, elastomeric silicone firestop that also acts as a barrier to water leakage and airborne sound transmission.

3M™ Fire Barrier Water Tight Sealant 1000 NS

Options available
The 3M™ Fire Barrier Water Tight Sealant 3000WT is a ready-to-use, high-performance, single component, neutral cure, silicone firestop that also acts as a barrier to water leakage and airborne sound transmission.

3M™ Fire Barrier Water Tight Sealant 3000 WT

Options available
The 3M™ Fire Barrier Pass-Through Device PT4SD is a firestop solution for electrical, data, communications cable or pipes penetrating fire-rated floors or walls.

3M™ Fire Barrier Round Pass-Through Device

Options available
The 3M™ Fire Barrier Moldable Putty Pads MPP+ feature a one-part, ready-to-use, re-enterable, intumescent putty that can be easily formed to firestop wall-openings and through penetrations in fire-rated assemblies.

3M™ Fire Barrier Moldable Putty Pads MPP+

Options available
3M™ Fire Barrier Rated Foam FIP 1-Step is a firestop foam used to fill the annular space created by pipes and cables penetrating through fire-rated construction. This product foams in place filling the void between the through penetrant (pipe, cable etc) and the wall creating a firestop seal restoring the fire rating of the entire wall.

3M™ Fire Barrier Rated Foam FIP 1-Step

Options available
The 3M™ Fire Barrier Self-Locking Pillow FB249SL is a self-contained, intumescent product that features interlocking strips that allow quick and secure pillow installation in floors or walls.

3M™ Fire Barrier Self-Locking Pillows

3M Stock

B40070036

The 3M™ Fire Barrier Wrap Strips FS-195+ are fire-resistive wraps with foil on one side that are designed to firestop penetrations in fire-rated floor, wall and floor/ceiling assemblies.

3M™ Fire Barrier Wrap Strips, FS-195+, 2 in x 24 in (5.1 cm x 61 cm)

3M Stock

B40070034

UPC

00051115071157

3M™ Fire Barrier Duct Wrap 615+

3M™ Fire Barrier Duct Wrap 615+, 24 in x 25 ft, 1 Roll/Case

3M Stock

B40070031

UPC

00051115549052

The 3M™ Fire Barrier Moldable Putty Stix MP+ are composed of a one-part, ready-to-use, re-enterable, intumescent putty that can be easily formed to firestop through penetrations and blank openings in fire-rated assemblies.

3M™ Fire Barrier Moldable Putty Stix, MP+, 1.4 in x 11 in (3.6 cm x 27.9 cm)

3M Stock

B40070019

UPC

00051115165269

The 3M™ Fire Barrier Mortar is a lightweight cementitious firestop with variable mix ratios for use in through penetration applications. It allows up to three hours of fire protection in tested and listed systems.

3M™ Fire Barrier Mortar, 44 lb (20 kg) bag

3M Stock

B40065449

UPC

00051115549007

3M™ Fire Barrier Duct Wrap 615+

3M™ Fire Barrier Duct Wrap 615+

3M Stock

123