- Fast-curing adhesive delivers tough, flexible bonds quickly
- Designed for vertical and other applications that require no slumping or sagging of the adhesive bead
- Flexible adhesive that is capable of bonding dissimilar substrates
- Non-Newtonian: (Chemical reaction two-parts)
|
|
|
|---|---|
|
Adhesive Type
|
Urethane
|
|
Applications
|
Encapsulating, Impact Resistant, Mounting & Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Potting, Sealing, Sealing, Potting and Encapsulating, Small Joint Assembly, Structural Bonding, Vibration resistant
|
|
Brand
|
Scotch-Weld™
|
|
Design Challenges
|
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
|
|
Full Cure Time
|
6 Hours @ 72 F (22 C)
|
|
Hardness
|
85 Shore A
|
|
Indoor/Outdoor
|
Both
|
|
Industries
|
Composite, Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
|
|
Mix Ratio Volume Base:Accelerator
|
1 : 1
|
|
Open Time
|
4 Minutes, 4 min @ 72 °F (22 °C)
|
|
Physical Form
|
Liquid, Paste
|
|
Position
|
Better
|
|
Product Colour
|
Black
|
|
Product Form
|
Each, Gallon
|
|
Product Type
|
Urethane Adhesive
|
|
Set Time
|
4 min
|
|
Shelf Life in Months (from date of manufacture)
|
12
|
|
Specific Gravity
|
1.03
|
|
Storage Temperature
|
60-80 F (16-27 C), 72 F (22 C)
|
|
Substrate
|
Ceramic, Elastomer, EPDM Rubber, Glass, Hardwood, High Surface Energy, (400-1100 Dynes/cm), Metal, Metal (Unpainted), Paint (Powder Coat, Painted Metal, Composite Panel), Plastic (ABS, PVC, Acrylic), Plastic (High Performance Nylon), Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Rough Surface, Rubber (Except EPDM), Wood
|
|
Substrate 1
|
EPDM Rubber, Glass & Ceramics, Metal, Plastic (ABS, PVC, Acrylic), Plastic (High Performance Nylon), Rubber (Except EPDM), Wood & Hardboard
|
|
Substrate 2
|
Elastomer, EPDM Rubber, Glass & Ceramics, High Surface Energy, (400-1100 Dynes/cm), Metal, Metal (Unpainted), Paint (Powder Coat, Painted Metal, Composite Panel), Plastic (ABS, PVC, Acrylic), Plastic (High Performance Nylon), Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Rough Surface, Rubber (EPDM, Santoprene), Rubber (Except EPDM), Wood, Wood & Hardboard
|
|
Units per Case
|
12, 6
|
|
Viscosity
|
Non-sag
|
|
Viscosity Range (cps) at Room Temperature
|
Paste
|
|
Work Time
|
4 Minutes
|
- Fast-curing adhesive delivers tough, flexible bonds quickly
- Designed for vertical and other applications that require no slumping or sagging of the adhesive bead
- Flexible adhesive that is capable of bonding dissimilar substrates
- Non-Newtonian: (Chemical reaction two-parts)
- Non-Newtonian: (Chemical reaction two-parts)
- Opaque black colour
The 3M™ Scotch-Weld™ Urethane Adhesive DP604NS is a black, non-sag, two-component polyurethane adhesive. Rapid-setting, this urethane adhesive offers a fast, very flexible solution that can be used for bonding dissimilar substrates, such as concrete, ceramic, wood, plastic, rubber, and metal.
The 3M™ Scotch-Weld™ Urethane Adhesive DP604NS is fast-curing. This adhesive quickly establishes tough bonds and offers low-temperature flexibility. 3M™ Scotch-Weld™ Urethane Adhesive DP604NS dispenses as a non-sag paste for accurate and precise handling during application. This adhesive can be used for bonding dissimilar substrates, such as concrete, ceramic, wood, plastic, rubber, and metal. With a 1:1 mix ratio, this urethane adhesive has a 4-minute work life, reaches handing strength in 20 minutes and full cure in 6 hours.
Suggested Applications
- Bonding wood, metal, or composite door frames to wood or other surfaces
- Staking electronic components
- Covering material against corrosion
- Sealing fabric water hoses
- Encapsulating for tamper proofing
