- High peel and shear strength maintains lasting bond at high and low temperatures
- Toughened for impact and fatigue resistance
- 20 minute work life provides time for positioning and adjustment
- Non-sag formulation ensures adhesive stays where applied
|
|
|
|---|---|
|
Adhesive Type
|
Epoxy
|
|
Applications
|
Encapsulating, Impact Resistant, Large Surface Lamination Assembly, Mounting & Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Potting, Sealing, Small Joint Assembly, Structural Bonding, Vibration resistant
|
|
Brand
|
Scotch-Weld™
|
|
Design Challenges
|
Impact & Shock Absorption, Noise Vibration & Harshness Control NVH
|
|
Flame Retardant
|
UL94 HB
|
|
Full Cure Time
|
24 Hours @ 72 F (22 C)
|
|
Hardness
|
75-80 Shore D
|
|
Indoor/Outdoor
|
Both
|
|
Industries
|
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, Signage, Specialty Vehicle, Transportation, Woodworking
|
|
Maximum Operating Temperature (Fahrenheit)
|
350 °F
|
|
Mix Ratio Volume Base:Accelerator
|
2 : 1
|
|
Open Time
|
20 min @ 72 °F (22 °C)
|
|
Physical Form
|
Flowable Liquid
|
|
Position
|
Best
|
|
Product Colour
|
Black
|
|
Product Form
|
Cartridge
|
|
Product Type
|
Epoxy Adhesive
|
|
Set Time
|
10 min - 30 min
|
|
Shear Strength
|
4500 psi
|
|
Shelf Life in Months (from date of manufacture)
|
15
|
|
Specific Gravity
|
1.14
|
|
Storage Temperature
|
60-80 F (16-27 C)
|
|
Substrate
|
Ceramic, Glass, High Surface Energy, (400-1100 Dynes/cm), Metal, Metal (Unpainted), Paint, Paint (Powder Coat, Painted Metal, Composite Panel), Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Stone, Wood
|
|
Substrate 1
|
Glass, Metal, Paint, Plastic, Easy-to-Bond (HSE), Wood
|
|
Substrate 2
|
Ceramic, Glass, High Surface Energy, (400-1100 Dynes/cm), Metal, Metal (Unpainted), Paint, Paint (Powder Coat, Painted Metal, Composite Panel), Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Smooth, Stone, Wood
|
|
Units per Case
|
12, 6
|
|
Viscosity
|
Non-sag
|
|
Viscosity Range (cps) at Room Temperature
|
Base: 190,000-270,000, Accelerator: 60,000-130,000
|
|
Work Time
|
15 min - 30 min
|
- High peel and shear strength maintains lasting bond at high and low temperatures
- Toughened for impact and fatigue resistance
- 20 minute work life provides time for positioning and adjustment
- Non-sag formulation ensures adhesive stays where applied
3M™ Scotch-Weld™ Epoxy Adhesive DP420NS is a black, toughened, non-sag, two-part epoxy structural adhesive that provides good strength along with high impact and fatigue resistance to meet demanding bonding challenges. 3M™ Scotch-Weld Epoxy Adhesive DP420NS can replace mechanical fasteners, screws, rivets, and spot welds in many applications.
Our 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS maintains bond strength at high and low temperatures and can withstand paint bake operations up to 400°F for 60 minutes. It works well on a variety of substrates such as metals, ceramics, wood, glass, many composites, and plastics, and is an excellent indoor bonding agent for joining, gluing, potting, panel bonding, and structural bonding. 3M™ Scotch-Weld™ Epoxy Adhesive DP420NS reaches handling strength in approximately two hours and is fully cured in 24 hours (at 72°F/22°C.) The mix ratio is 2:1 and provides a 20-minute work life, providing time to adjust for desired fit prior to curing. This adhesive is available in a variety of package sizes and can be dispensed in several ways to meet the demands of the user and the job. 3M™ Scotch-Weld ™ Epoxy Adhesive DP420NS is appropriate for applications that will face tough environmental challenges. Formulated to provide strong adhesion for the long-term, this resilient epoxy is another way 3M has applied our expertise to meet and exceed the demands of even the toughest applications.
