|
|
---|---|
Adhesive Type
|
Epoxy
|
Applications
|
Mounting & Trim Attachment, Panel to Frame/Stiffner to Panel Assembly, Sealing, Potting and Encapsulating, Small Joint Assembly, Structural Bonding, Vibration resistant
|
Brand
|
Scotch-Weld™
|
Design Challenges
|
Noise Vibration & Harshness Control NVH
|
Flame Retardant
|
FAR 25.853, UL94 V-0
|
Full Cure Time
|
24-48 Hours @ 72 F (22 C)
|
Hardness
|
87 Shore D
|
Indoor/Outdoor
|
Both
|
Industries
|
Construction, Consumer Goods, Electronics, General Industrial, Metalworking, Military and Government, MRO, Signage, Specialty Vehicle, Transportation, Woodworking
|
Mix Ratio Volume Base:Accelerator
|
1 : 1
|
Open Time
|
6 min @ 72 °F (22 °C)
|
Physical Form
|
Flowable Liquid
|
Position
|
Best
|
Product Form
|
Cartridge, Each
|
Product Type
|
Epoxy Adhesive
|
Set Time
|
4 min
|
Shear Strength
|
2200 psi, 3500 psi
|
Shelf Life in Months (from date of manufacture)
|
15
|
Specific Gravity
|
1.37
|
Storage Temperature
|
60-80 F (16-27 C), 72 Degree Fahrenheit
|
Substrate
|
Ceramic, Glass, High Surface Energy, (400-1100 Dynes/cm), Metal, Metal (Unpainted), Paint, Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Rubber (Except EPDM), Smooth, Wood
|
Substrate 2
|
Glass, Glass & Ceramics, High Surface Energy, (400-1100 Dynes/cm), Metal, Metal (Unpainted), Paint, Plastic: HSE, MSE (ABS, Acrylic, Polycaronate, Nylon), Rubber (Except EPDM), Smooth, Wood
|
Units per Case
|
12
|
Viscosity
|
Non-sag
|
Viscosity Range (cps) at Room Temperature
|
Base: 90,000-150,000, Accelerator: 50,000-85,000
|
The 3M™ Scotch-Weld™ Epoxy Adhesive DP100FR is fast-setting and low viscosity adhesive for easy dispensing. This adhesive has a 1:1 mix ratio, a six minute worklife and reaches handling strength in approximately 20 minutes. 3M™ Scotch-Weld™ Plus II Applicator and Mix nozzles are required for dispensing (not included).
The 3M™ Scotch-Weld™ Epoxy Adhesive DP100FR is a versatile structural adhesive. Does not contain brominated or antimony-based flame retardants. It works on a variety of substrates including metals, ceramics, concrete, and wood. Its high shear strength delivers strong, rigid performance, making it ideal for multiple applications in the electrical, general industrial, construction and consumer goods industries.