3M™ Fastbond™ Contact Adhesive 30NF

  • Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas to themselves and to each other
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
  • Adhesive can be applied by spray, brush or roller
  • Non-flammable in its wet state
 More...
View all details
Specifications
Alternative Sale Availability
6. This item is for industrial use only and there are no VOC restrictions.
Application Method
Brush, Roll, Spray
Applications
Bond Countertop Laminate to Particle Board, Bond Honeycomb Core to Metal, Floor Bonding, Seat Assembly
Brand
Fastbond™
Colour Family
Beige, Green
Container Size (Imperial)
1 Gallon, 5 Gallon, 55 Gallon
Container Size (Metric)
18.927 L, 208.198 L, 3.785 L
Environmental Considerations
California Air Resources Board, GREENGUARD® Certified, Helps contribute to LEED® credits, Low VOC, Ozone Transport Commission, SCAQMD
Flame Retardant
Non-flammable
Govt Markets Product Category
Maintenance
Heat Resistance
<230 Degree Fahrenheit
Heat Resistance (Celsius)
<110 °C
Industries
Construction, Furniture, General Industrial, Military and Government, MRO, Specialty Vehicle, Transportation, Woodworking
Open Time
30 minutes to 4 hours
Physical Form
Thin liquid
Product Colour
Green, Neutral
Product Form
Bulk
Product Key
30NF
Regulatory Key
AD-00856, AD-00857
Solids Weight Percent (Approximate)
42.4 to 50 Percent, 47 to 51 Percent
Substrate
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers), Rigid Foam (Beadboard Styrene), Rigid Foam (Urethane), Rubber (Except EPDM), Wood & Hardboard
Substrate 1
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers)
Substrate 2
Fabric, Felt, Cork & Fibrous Glass, Flexible Foam (Latex, Urethane), Glass & Ceramics, Leather, Metal, Paper & Cardboard, Plastics (ABS, PVC, Acrylic), Plastics (Flexible Vinyl), Plastics (High Performance Nylon), Plastics (Polyolefins and Thermoplastic Elastomers)
Units per Case
1, 12, 4
Volatile Organic Compounds (VOCs)
37 Grams Per Litre
Volume (Imperial)
1 gal, 5 gal, 52 gal
Volume (metric)
18.927 L, 196.841 L, 3.785 L
Details
  • Bonds most foamed plastics, plastic laminate, wood, plywood, and canvas to themselves and to each other
  • Creates a very high strength, high temperature resistant bond with up to a four hour bonding range
  • Adhesive can be applied by spray, brush or roller
  • Non-flammable in its wet state

The 3M™ Fastbond™ Contact Adhesive 30NF is a low-odour, water-based adhesive designed to have high strength, high coverage, a long bonding range, and good heat resistance.

The 3M™ Fastbond™ Contact Adhesive 30NF has proven to bond combinations of most foamed plastics, plastic laminate, wood, plywood, wood veneer, and canvas.

Suggested Applications

  • Bonding plastics, plastic laminate, wood, plywood, wood veneer, and canvas
Ask an expert