3M™ Particulate Filter, 5P71, P95, 50 pairs/case

  • 3M ID 7000002054
  • UPC 50051131071945

NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series, and 3M™ Filter Retainer 501

Use on top of 3M™ Filter Holder, 603 and 3M™ Retainer, 501 to reduce particulate exposure

Advanced Electret Media (AEM) provides lightweight, easy breathing comfort

View more details
 

Alert | Increased demand for respiratory protection products

3M is seeing an increased demand for respiratory protection products following the outbreak of a newly identified coronavirus (2019 novel Coronavirus, 2019-nCoV). In response, 3M is increasing respirator production to help meet demand, and working with distributors to help ensure they have inventory to meet end-user demand. 3M is committed to supporting the public health and governmental response to the Coronavirus while maintaining supply to existing customers.

Details

Highlights
  • NIOSH approved for environments containing certain oil and non-oil based particles. Use with 3M™ Respirators 5000 Series or 3M™ Cartridges 6000 Series, and 3M™ Filter Retainer 501
  • Use on top of 3M™ Filter Holder, 603 and 3M™ Retainer, 501 to reduce particulate exposure
  • Advanced Electret Media (AEM) provides lightweight, easy breathing comfort
  • Held in place by required 3M™ Filter Retainer, 501
  • Advanced Electret Media (AEM) is designed to provide lightweight, easy breathing comfort
  • Simple to install
  • Use for protection in hazardous environments. For workplace/occupational use only

The 3M™ Particulate Filter 5P71 is NIOSH approved for environments containing certain oil and non-oil based particles.

Use with 3M™ Respirators, 5000 Series or 3M™ Cartridges, 6000 Series or 3M™ Filter Adapter, 603, and 3M™ Filter Retainer, 501. When properly fitted, use the 3M™ Particulate Filter 5P71 with appropriate cartridges for various applications including spray painting, lacquering, petrochemical and chemical manufacturing, pesticide spraying and agriculture for concentrations up to 10 times the Permissible Exposure Limit (PEL) with half facepieces or 50 times PEL with full facepieces. Full facepieces must be quantitatively fit tested to claim assigned protection factor above 10 in negative pressure mode. Use with 603 adapter if only particulate protection is required. Do not use in environments that are Immediately Dangerous to Life or Health (IDLH).

Suggested applications
  • NIOSH approved for environments containing certain oil and non-oil based particles
  • Cleaning
  • Painting

Typical Properties

Resources