1. Canada
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Motor Lead Splices
  6. 3M™ Motor Lead Pigtail Splice Kit 5300, 1 kV, 1-Hole Lug Connection, 14-10 AGW (Feeder), 16-12 AGW (Motor Lead)

3M™ Motor Lead Pigtail Splice Kit 5300, 1 kV, 1-Hole Lug Connection, 14-10 AGW (Feeder), 16-12 AGW (Motor Lead)

3M ID 7000005804
  • Fast and simple installation
  • No torches or heat source needed to install
  • Thick walls to resist puncture and abrasion damage
  • Easy re-entry
 More...
View all details
Specifications
Brand
3M™
Connection Type
Pigtail (Non-shielded)
Insulation Outside Diameter
0.12-0.21 Inch
Insulation Outside Diameter Range
0.12-0.21 in
Insulation Outside Diameter Range (metric)
3.0 - 5.3 mm
Lug Cover Inner Diameter
0.45 in
Lug Cover Inner Diameter (metric)
11.4 mm
Lug Cover Length
2.1 in
Lug Cover Length (metric)
53.3 mm
Manufacturing Origin
USA
Maximum Bolt Length
3/8 in
Maximum Bolt Length (metric)
9.5 mm
Maximum Feeder Lead Size
10 AWG
Maximum Motor Lead Size
12 AWG
Maximum Operating Voltage
1 kV
Range Feeder Cable (AWG & kcmil)
14-10
Splice Type
Pigtail Only
Units per Case
1
Voltage
1 kV
Details
  • Fast and simple installation
  • No torches or heat source needed to install
  • Thick walls to resist puncture and abrasion damage
  • Easy re-entry
  • Contains all materials required to make three splices (excluding lugs)
  • CSA Certified and RoHS 2011/65/EU Compliant‎

The 3M™ Motor Lead Pigtail Splice Kit makes three splices. Lugs are not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).

3M™ Motor Lead Pigtail Splice Kits are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kit. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used (not included). Each kit includes: 3 pigtail lug covers, 3 mastic sealing strips, 3 locking pins, 3 tubes of silicone grease and an instruction sheet.

Suggested Applications

  • Splicing motor lead cables to incoming feeder cables
  • Designed for use with copper compression, one-hole lugs
Documents