1. Canada
  2. All 3M Products
  3. Electrical
  4. Splices & Accessories
  5. Motor Lead Splices
  6. 3M™ Motor Lead Pigtail Splice Kit 5304, 1 kV, 1-Hole Lug Connection, 250-500 kcmil (Feeder), 4/0 AWG-500 kcmil (Motor Lead)

3M™ Motor Lead Pigtail Splice Kit 5304, 1 kV, 1-Hole Lug Connection, 250-500 kcmil (Feeder), 4/0 AWG-500 kcmil (Motor Lead)

3M ID 7000005808UPC 00054007122661
  • Fast and simple installation
  • No torches or heat source needed to install
  • Thick walls to resist puncture and abrasion damage
  • Easy re-entry
 More...
View all details
Specifications
Brand
3M™
Connection Type
Pigtail (Non-Shielded)
Insulation Outside Diameter
0.67-1.05 Inch
Insulation Outside Diameter Range
0.67-1.05 in
Insulation Outside Diameter Range (metric)
17.0 - 26.7 mm
Lug Cover Inner Diameter
1.70 in
Lug Cover Inner Diameter (metric)
43.2 mm
Lug Cover Length
6.7 in
Lug Cover Length (metric)
170.2 mm
Manufacturing Origin
USA
Maximum Bolt Length
1-1/2 in
Maximum Bolt Length (metric)
38.1 mm
Maximum Feeder Lead Size
500 kcmil
Maximum Motor Lead Size
500 kcmil
Maximum Operating Voltage
1 kV
Range Feeder Cable (AWG & kcmil)
250-500
Splice Type
Pigtail Only
Units per Case
1
Voltage
1 kV and less
Details
  • Fast and simple installation
  • No torches or heat source needed to install
  • Thick walls to resist puncture and abrasion damage
  • Easy re-entry
  • Contains all materials required to make three splices (excluding lugs)
  • CSA Certified and RoHS 2011/65/EU Compliant‎

The 3M™ Motor Lead Pigtail Splice Kit makes three splices. Lugs are not included in kits. Feeder of 2-1/0 AWG (35-50 sq mm), motor lead 4-1/0 AWG (25-50 sq mm).

3M™ Motor Lead Pigtail Splice Kits are designed for splicing motor lead cables to incoming feeder cables, including the accommodation of pigtail (stub) connections at 1000 volts and less. The splice’s main component, the slip-on lug cover, is made from EPDM rubber. Mastic strips are used for the moisture seal. These kits are designed to be used with copper compression, one-hole lugs. After being crimped onto the cables, the lugs are bolted together in a pigtail configuration, then insulated and sealed with the 3M™ Motor Lead Splicing Kit. 3M™ Scotchlok™ Copper Compression Lugs 30000 Series, or other UL listed copper lugs, can be used (not included). Each kit includes: 3 pigtail lug covers, 3 mastic sealing strips, 3 locking pins, 3 tubes of silicone grease and an instruction sheet.

Suggested Applications

  • Splicing motor lead cables to incoming feeder cables
  • Designed for use with copper compression, one-hole lugs
Contact a Representative

We’re here to help.

This form is intended for electrical utility professionals only. If you are a consumer, please visit our consumer site.


All fields are required.

    Contact Information

  • Enter your 10-digit phone number. Numbers only (5555555555).
  • Company Information


3M will use the information to respond to your request and in accordance with our Privacy Policy.

3M takes your privacy seriously. 3M and its authorized third parties will use the information you provided in accordance with our Privacy Policy to send you communications, which may include promotions, product information and service offers.

Loading wheel
A green circle with a checkmark inside.
Thank you for contacting us.

Our goal is to respond to your request within 1-2 business days. Some questions, however, may need further investigation so that we can provide you with an appropriate response.

A red circle with an x inside.
Sorry!

We can’t seem to complete your request. Please try again.