3M™ Cold Shrink Corrosion Protection Kit, CPT-3/4, cable minimum O.D. 0.66 in (17 mm)
- 3M ID 7000006140
- UPC 00054007430223
Details
Highlights
- Quick and easy to install
- Cold shrink sleeve maintains pressure and resiliency over time
- Meets salt spray requirements
- Insulator is formulated with EPDM rubber which contains no chlorides or sulfur
- Provides tight sealing between NPT fitting threads and the enclosure using mastic strips
- Includes an insulator assembly, mastic seal strip pack and instruction sheet
3M™ Corrosion Protection Kit is designed to provide a quick and easy method for protecting bulkhead termination connectors from the corrosive influences of wet and salt-fog installation environments. Mastic strips are provided for sealing between NPT fitting threads and the enclosure in use (junction box, cabinet, panel board, etc.).
The sleeve has a 0.66 in (17 mm) O.D. (minimum) and the connector has a 1.9 in (48 mm) maximum O.D. and 4.8 in (122 mm) maximum installed length.
Suggested applications
- To protect bulkhead termination connectors in highly corrosive environments
Typical Properties
Similar products
| Brands | 3M | |
| Cable Minimum Outside Diameter | 0.66 in | |
| Cable Minimum Outside Diameter (metric) | 16.8 mm | |
| Connector Maximum Installed Length | 4.80 in | |
| Connector Maximum Installed Length (metric) | 122 mm | |
| Connector Maximum Outside Diameter | 1.90 in | |
| Connector Maximum Outside Diameter (metric) | 48.3 mm | |
| Material | EPDM Rubber | |
| Maximum Cable Diameter (Imperial) | 1.902 in | |
| Maximum Cable Diameter (Metric) | 48.3 mm | |
| Maximum Cable Outside Diameter (Metric) | 16,8 mm | |
| Minimum Cable Diameter (Imperial) | 0.66 in | |
| Minimum Cable Diameter (Metric) | 16.8 mm | |
| Units per Case | 10.0 |
3M™ Cold Shrink Corrosion Protection Kit, CPT-3/4, cable minimum O.D. 0.66 in (17 mm)
3M™ Electrostatic Animal Guards