3M™ Bristle Brush Flange, FL-AC, 6 in, 25 ea/Case
- 3M ID 7000028515
- UPC 00048011276281
Required products
Required to Use
Details
Highlights
- Two-piece flange holds a minimum of 7 bristle brushes
- 1 inch (25.4 mm) hole optimizes mounting of 6 inch (152.4 mm) bristle brushes on in-line sander and bench motors with a 1 inch (25.4 mm) diameter shaft
- 3M™ Telescoping Wheel Flange Adapter (Part No. 5, sold separately) can be inserted in the center hole to adapt to shaft sizes as small as 1/2 inch (12.7 mm) diameter
- Can be used with one or more 3M™ Spindle Extender Adapters (Part No. 30134, sold separately) when additional layers of bristle discs are required
3M™ Bristle Brush Flange holds together a minimum of seven 6 inch (152.4mm) radial bristle brushes for use on in-line sanders or bench motors with a shaft size of 1 inch (25.4 mm) diameter.
For in-line sander or bench motors with shafts smaller than 1 inch (25.4mm), a 3M™ Telescoping Wheel Flange Adapter can be inserted into the center hole to fit 1/2 inch (12.7mm), 5/8 inch (15.875mm), 3/4 inch (19.05mm) or 7/8 inch (22.23mm) shafts. When a greater thickness of bristle brush is needed, 3M™ Spindle Extender Adapters (Part No. 30134) can be added to increase the disc capacity of the flange adapter. These additional adapters are sold separately.
Typical properties
