1. Canada
  2. All 3M Products
  3. Electrical
  4. Wire & Cable
  5. Tubing & Molded Parts
  6. Heat Shrink Tubing
  7. 3M™ Heat Shrink Thin-Wall Tubing, FP-301, assorted colours,3/32 in x 6 in (0.24 cm x 15.24 cm)

3M™ Heat Shrink Thin-Wall Tubing, FP-301, assorted colours,3/32 in x 6 in (0.24 cm x 15.24 cm)

3M ID 7000031556
  • Rated for 135°C (275° F) continuous operation
  • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
  • 2:1 shrink ratio
  • Flexible and split resistant
 More...
View all details
Specifications
Additional Flammability Rating
23053/5 class1
Applicable SAE-AMS-DTL-23053 Specifications
23053/5 class 1
Assortment Kits
Yes
Brand
3M™
Colour Family
Multi-colour
Elongation
400 %
Expanded Inner Diameter
0.093 in
Expanded Inner Diameter (metric)
2.36 mm
Flame Retardant
Yes (except clear)
Flammability Rating
UL 224 All Tubing Flame Test
Inner Diameter After Shrink (Imperial)
0.046 in
Inner Diameter After Shrink (Metric)
1.17 mm
Inner Diameter Before Shrink (Imperial)
0.093 in
Inner Diameter Before Shrink (Metric)
2.36 mm
Manufacturing Origin
USA
Material
Flexible Polyolefin
Maximum Operating Temperature (Celsius)
135 °C
Maximum Operating Temperature (Fahrenheit)
275 °F
Mil Spec
AMS-DTL-23053/5, Class 1
Minimum Shrink Temperature (Celsius)
100 °C
Non-Corrosive
Yes
Operating Temperature (Celsius)
-55 to 135 Degrees Celsius
Operating Temperature Range (Celsius)
-55 °C to +135 °C
Operating Temperature Range (Fahrenheit)
-67 °F to 275 °F
Overall Length (Imperial)
6 in
Product Form
6 in (15.24 cm) pieces
Product Key
FP03 FP301 3/32 FPA
Recovered Inner Diameter
0.05 in
Recovered Inner Diameter (metric)
1.17 mm
Shrink Ratio
2:1
Tensile Strength (Imperial)
2400 Pound-Force Per Square Inch
Tubing Type
Single Wall (Thin)
Units per Case
35
Details
  • Rated for 135°C (275° F) continuous operation
  • Designed to withstand elevated temperatures to 300°C (572°F) for short periods of time
  • 2:1 shrink ratio
  • Flexible and split resistant
  • Rated for 600V applications
  • Flame-retardant tubing is rated for 600V applications

3M™ Heat Shrink Thin-Wall Tubing is a heat-shrinkable, flexible polyolefin tubing that offers an outstanding balance of electrical, physical and chemical properties for a wide variety of industrial and military applications.

3M™ Heat Shrink Thin-Wall Tubing is typically used as a shrink-fit electrical insulation over cable splices and terminations. It is also used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire resistant covering. The tubing is split resistant, mechanically tough, easily marked and resists cold flow. This product meets the requirements of SAE-AMS-DTL-23053/5, Class 1, Class 2 (clear) AMS-3636, AMS-3637, is Underwriters Laboratories (UL) Recognized, File E-39100, at 600 volts maximum at 125°C and is CSA Certified, CSA LR38227, at 600 volts maximum at 125°C.

Suggested Applications

  • Typically used as shrink-fit electrical insulation over cable splices and terminations
  • Used for lightweight wire harness covering, wire marking, wire bundling, component packaging and fire-resistant covering