3M™ Cold Shrink Insulator, 8425-8, 2-1/0 AWG (35-50 mm²)
- 3M ID 7000031605
- UPC 00054007423911
Details
Highlights
- Quick and easy installation, no special tools and no heat required
- Seals tight, retains resiliency and pressure
- Accommodates a wide range of cable sizes
- Resists acids, alkalis and ozone
- No mastic or tape required to seal
- WATER-RESISTANT SEAL: Meets the water-resistant requirements of ANSI C-119.1
- WORK YOUR WAY: Accommodates a variety of cable sizes that can be used in direct burial or submersible applications
- LONG-LASTING: Maintains thermal stability, resiliency, and pressure for dependable performance
3M™ Cold Shrink Insulators are open-ended, tubular, EPDM rubber sleeves which are factory expanded and assembled onto a removable core. The core is removed after the tube has been positioned for installation over an inline connection, terminal lug, etc., allowing the tube to shrink and form a water-resistant seal.
3M™ Cold Shrink Insulators are designed using a unique cold shrink delivery system. They are supplied prestretched on a removable core for efficiency and ease of installation. Removal of the core after positioning allows the product to shrink into position forming a moisture-tight seal. The live memory action of the specially formulated material ensures a permanent, durable environmental seal and insulation.
Suggested applications
- Primary electrical insulation for all solid dielectric (rubber and plastic) up to 1kV
- Direct burial and submersible applications
- Insulate tape shield, wire shield or UniShield® cable
- Environmental sealing for communications and other non-electrical applications
- Sheath repairs
- Physical protection and moisture sealing for air-insulated connectors and lugs such as spacer cable and lug connections to bus bar
- Insulating secondary splices
Typical Properties
Similar products
Current product  3M™ Cold Shrink Insulator, 8425-8, 2-1/0 AWG (35-50 mm²) | ||
|---|---|---|
| Applications | Insulation, mechanical protection, repair | |
| Brands | 3M | |
| Cable Shielding | UniShield®, Wire Shield, Tape Shield, Non-shielded | |
| Case Quantity | 10 | |
| Conductor Material | Aluminum, Copper | |
| Conductor Sizes (Imperial) | 1 AWG, 2 AWG, 1/0 AWG | |
| Conductor Sizes (Metric) | 35 mm² | |
| Halogen Free | No | |
| Inner Diameter After Shrink (Imperial) | 0.24 in | |
| Inner Diameter After Shrink (Metric) | 6.1 mm | |
| Inner Diameter Before Shrink (Imperial) | 0.941 in | |
| Inner Diameter Before Shrink (Metric) | 23.9 mm | |
| Material | EPDM Rubber | |
| Maximum Conductor Size (Imperial) | 19.93 kcmil | |
| Maximum Conductor Size (Metric) | 10.1 mm² | |
| Maximum Connector Length | 3.0 in | |
| Maximum Connector Length (metric) | 76.2 mm | |
| Maximum Operating Temperature (Celsius) | 90 °C | |
| Maximum Operating Temperature (Fahrenheit) | 194 null | |
| Minimum Conductor Size (Imperial) | 2 AWG |
3M™ Cold Shrink Quick Insulators QI Series20 of 39
