1. Canada
  2. All 3M Products
  3. Adhesives, Sealants & Fillers
  4. Structural Adhesives
  5. Structural Adhesive Films
  6. 3M™ Scotch-Weld™ Structural Core Splice Film, AF 3024, 10 in x 24 in, 50 mil

3M™ Scotch-Weld™ Structural Core Splice Film, AF 3024, 10 in x 24 in, 50 mil

3M ID 7000046402
  • High expansion (250%)
  • Low sag during cure
  • Low volatile loss
  • High performance from -55°C to 176°C (-67°F to 350°F)
 More...
View all details
Specifications
Adhesive Type
Epoxy
Applications
Splicing
Brand
Scotch-Weld™
Capabilities
Aircraft Maintenance & Production Efficiency
Chemical Base
Epoxy
Colour Family
White
Cure Temperature
250/350 Degree Fahrenheit
Market Segment
Structures
Maximum Operating Temperature (Celsius)
176 °C
Maximum Operating Temperature (Fahrenheit)
350 °F
Minimum Operating Temperature (Fahrenheit)
-67 °F
Nominal Adhesive Thickness (Imperial)
50 mil
Overall Length (Imperial)
24 in
Overall Length (Metric)
610 mm
Overall Width (Imperial)
10 in
Overall Width (Metric)
254 mm
Product Colour
Off White
Product Form
Sheet
Size (Imperial)
10 in x 24 in
Size (Metric)
254 mm x 610 mm
Storage Environment
Freezer Storage
Details
  • High expansion (250%)
  • Low sag during cure
  • Low volatile loss
  • High performance from -55°C to 176°C (-67°F to 350°F)
  • Compatible with Scotch-Weld™ adhesive films
  • Full expansion even at slow heat up rates (.5°F/minute)
  • Full expansion even at slow heat up rates (.5°F/minute)

3M™ Scotch-Weld™ Structural Core Splice Film AF 3024 is a low-density, expandable, core splice adhesive film which is designed for filling mismatch areas or reinforcing and splicing honeycomb core.

3M™ Scotch-Weld™ Structural Core Splice Film AF 3024 is a 121°C / 250°F to 176°C / 350°F curing, low-density, expandable, core splice adhesive film. It offers high expansion, low sag during cure, low volatile loss and high performance from -55°C / -67°F to 176°C / 350°F. It is compatible with 3M™ Scotch-Weld™ Adhesive Films and Composites. It offers full expansion even at slow heat-up rates (.5°F/minute).

Suggested Applications

  • Filling mismatched areas
  • Reinforcing and splicing honeycomb core