1. Canada
  2. All 3M Products
  3. Abrasives
  4. Abrasive Wheels
  5. Deburring & Finishing Wheels
  6. Scotch-Brite™ Multi-Finishing Wheel, MU-WL, FIN, 6 in x 4 in x 1 in (15.24 cm x 10.16 cm x 2.54 cm)

Scotch-Brite™ Multi-Finishing Wheel, MU-WL, FIN, 6 in x 4 in x 1 in (15.24 cm x 10.16 cm x 2.54 cm)

3M ID 7000120692UPC 00048011143835
  • Silicon carbide abrasive and open web technology make this wheel ideal for final finishing
  • Convolute construction provides a balanced, smooth running wheel throughout product life
  • Open, non-woven web construction runs cool and lessens impact on heat-sensitive materials
  • Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
 More...
View all details
Specifications
Abrasive Material
Silicon Carbide
Applications
Finishing
Attachment Type
Centre Hole
Brand
Scotch-Brite™
Centre Hole Diameter (Imperial)
1 in
Centre Hole Diameter (Metric)
25.4 mm
Density
2
Equipment - Machines
Inline Sanders, Manual Backstand
Form Type
Wheel
Grade
Fine
Industries
Metalworking
Maximum Speed
6000 rpm
Product Form
Wheel
Sub Industries
Builders Hardware, Medical Instruments, Metal Fabrication, Metal Implants, Plumbing Fixtures, Turbine Engines
Substrate
Aluminum, Soft Metal, Stainless Steel
Details
  • Silicon carbide abrasive and open web technology make this wheel ideal for final finishing
  • Convolute construction provides a balanced, smooth running wheel throughout product life
  • Open, non-woven web construction runs cool and lessens impact on heat-sensitive materials
  • Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel
  • Moderate aggressiveness and lighter density provide controlled wear for consistent results over the life of the wheel

The Scotch-Brite™ Multi-Finishing Wheel is a convolute-constructed wheel that provides cleaning and final finishing for stainless steel, aluminum, brass, copper, and other metals. The combination of silicon carbide abrasive and soft density make the wheel well-suited for final finishing applications where a high degree of conformability and less density are needed.

The Scotch-Brite™ Multi-Finishing Wheel is ideal for producing #3 or #4 finishes on stainless steel and other metals on curved, contoured, and flat surfaces. The Multi-Finishing Wheel runs cool and resists loading due to its open-web construction, reducing the risk of part discolouration and warping while extending the life of the wheel. This wheel uses a silicon carbide abrasive. Silicon carbide is a synthetic mineral that is very sharp and commonly used for low-pressure applications such as paint prep. While it breaks down faster than aluminum oxide, it produces a superior finish. Scotch-Brite™ industrial abrasives are unique surface conditioning products with abrasives incorporated into non-woven nylon or synthetic fibres. Combining abrasives with the fibres creates an abrasive system that delivers consistent results for the life of the product. We chose an open-web material that runs cool and is load resistant, which keeps the abrasive minerals cutting at high performance by limiting clogging of the fibres.

Suggested Applications

  • Use this multi-finishing wheel to achieve a uniform grain for final finishing on stainless steel, ferrous, and non-ferrous metals
  • Highly conformable for consistent finishing on contoured, curved and other surfaces