3M™ Cold Shrink Inline Splice Kits 5730 Series are applicable for indoor and outdoor installations, including direct burial, aerial and submersible applications.
Each 3M™ Cold Shrink Inline Splice Kits 5730 Series requires at least 1 roll of 3M™ Sheath Wrap. For use with 3/C or 4/C Armor Power Cable (Teck-90) up to 1000 V. 3M™ 3/C Armored Power Cable 5730 Series accommodates a full range of cable sizes from 14 AWG–750 kcmil. The overall jacket diameter ranges from 16–102 mm (0.62–4.00” ). Notes: Connectors are not included in the kit. Use only CSA certified compression connectors. Vinyl or nylon butt connectors are preferred for 5730 and 5731 series. Amount of Sheath Wrap needed is based on two half-lapped layers and 4.57 m (15’) rolls
Current product 3M™ 3/C Low Voltage Splice Kit, 5735, 0 - 1000 V, 1/Case | ||
|---|---|---|
| Brands | 3M™ | |
| Cable Insulation Outside Diameter Range | 1.55 in - 4 in | |
| Cable Insulation Outside Diameter Range (metric) | 100.076 mm - 99.822 mm | |
| Cable Type | Armored Power Cable | |
| Conductor Sizes (Imperial) | 500 kcmil, 600 kcmil, 700 kcmil, 750 kcmil | |
| Conductor Sizes (Metric) | 400 mm² | |
| Conductor Type | Aluminum or Copper | |
| Maximum Conductor Size (Imperial) | 750 kcmil | |
| Maximum Conductor Size (Metric) | 400 mm² | |
| Minimum Conductor Size (Imperial) | 500 kcmil | |
| Minimum Conductor Size (Metric) | 240 mm² | |
| Number of Conductors | 3 | |
| Overall Jacket Diameter | 1.55 in - 4 in | |
| Splice Type | Inline | |
| Voltage | 1 kV, 600 V |